[Asterisk-Users] ATA 186 Registration!!!!

[Ejay Hire]

Hi.

Open http://ip.of.your.ata/dev and set LoginID0: and
LoginID1: to your login Id.  Then set UseLoginID: to 1.

If you haven't already, set a password on the ATA by
entering it into the UIPassword: field.  This field does not
have repeat to confirm, so type carefully.

Last but not least, there is a bug in the v3.0 code for the
186's.  If you use the TOS bit's to mark SIP for QOS,
downgrade back to 2.1.6.  In 3.0, the ata sets TOS to 0x0,
and ignores the TOS: configuration field.

Hope that helps,

Ejay Hire
ISDN-Net Network Engineer
...Providing VoIP services to Tennessee businesses since
2003

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf
Of 
> Erick Weber V.
> Sent: Monday, February 23, 2004 5:24 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] ATA 186 Registration!!!!
> 
> I'm tring to register my ATA to * and I getting the
following message:
> 
> Feb 23 18:13:04 NOTICE[1125329600]: chan_sip.c:5405
handle_request:
> Registration from '<sip:404 at xxx.xxx.xxx.xxx user=phone>'
failed for
> 'xxx.xxx.xxx.xxx'
> 
> I don't know what's wrong an why it register as
user=phone???
> 
> Coul some one help me!!!!
> 
> Thanks
> 
> Erick
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users