[Asterisk-Users] 2 questions about ISDN BRI

[Tomica Crnek]

I did this also, but the result is the same 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Tim Robinson
Sent: Sunday, February 22, 2004 7:36 PM
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] 2 questions about ISDN BRI

it appears that Asterisk does not support groups using isdn4linux.  You
need to put in the full channel name instead of Modem/g1.

At least, this worked for me anyway.

Rgds
Tim



Tomica Crnek wrote:

> 1st question
> ------------
> I am able to receive calls to Asterisk via BRI, but when I attempt to 
> dial out from Asterisk to ISDN I always get
>  
>     -- Executing Dial("SIP/1001-3fb0", "Modem/g1:6658218") in new
stack
>     -- Called g1:6658218
>     -- Modem[i4l]/ttyI1 is busy
>     -- Hungup 'Modem[i4l]/ttyI1'
>  
> 
> 2nd question
> ------------
> Is it possible to emulate ISDN NT device with Asterisk and connect 
> other ISDN devices directly to Asterisk? If it is, what do I have to 
> do to switch Asterisk behavior to NT.
>  
>  
> thanks
> Tomica
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users