[Asterisk-Users] Caller ID Oddity

[Lee Redmayne]

Hi all

Another oddity for you...

24 port FXO Rhino Channel Bank connected to a TE410P card on Span 1, 6
channel Q.931 PRI connected to Span 2 (Telewest not BT so using Nortel
Equipment), Caller ID will not appear on the client phones (ADSI
PT350s).

The CLI says:
    -- Executing Dial("Zap/25-1", "Zap/4") in new stack
    -- Called 4
    -- Accepting call from '7912345678' to '943' on channel 1, span 2
    -- Zap/4-1 is ringing
    -- Zap/4-1 is ringing
    -- Zap/4-1 is ringing
    -- Zap/4-1 is ringing
    -- Zap/4-1 is ringing
    -- Zap/4-1 is ringing
    -- Zap/4-1 is ringing
    -- Channel 1, span 2 got hangup
    -- Hungup 'Zap/4-1'
  == Spawn extension (incoming, 943, 1) exited non-zero on 'Zap/25-1'
    -- Hungup 'Zap/25-1'

If sent to a SIP phone, it forwards the CID successfully...

Any ideas?