[Asterisk-Users] Hide outgoing CallerId on Zap interface

[Alfred R. Nurnberger]

The correct way to hide your callerid on a PRI interface is to set the
presentation indicator.
Some CO switches do a basic sanity check on the callerid they receive. If
you set the number string to empty
but the presentation indicator to allow the number they will replace the
number string by your main number.

I do not know how or if possible to change the presentation indicator on *
but a look in libpri should give some clues.

- Alfred.

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com]On Behalf Of Mickey Binder
Sent: Monday, February 16, 2004 6:13 AM
To: asterisk-users at lists.digium.com
Subject: RE: [Asterisk-Users] Hide outgoing CallerId on Zap interface


There seems to be some trouble with either the maillist or my client. I
haven't received any of the posted replys on this topic, but found the
replys through the asterisk.linkx.net search engine. But anyways here is the
reply on the mail from: "James H dot  Cloos Jr." <cloos at jhcloos.com>

>> If it is a pri I'd give SetCallerID("<>") a try in the dialplan.

It is a PRI and I've tried the SetCallerId("<>") which displays my PRI main
number, like the other experiments I've tried.
I talked to my Telco provider which said that it isn't possible to hide the
number via shortcodes but that it should be done via my PABX.

-----Original Message-----
From: Mickey Binder [mailto:mickey at comflex.dk]
Sent: 13. februar 2004 12:14
To: Asterisk maillist
Subject: [Asterisk-Users] Hide outgoing CallerId on Zap interface

Hi there

I know I have asked a somehow similar question earlier but since then I've
tried some different things which isn't working.

I want to completely hide my outgoing CallerId when dialing out on my Zap
interface.
I've tried a lot of different settings in sip.conf and hoped that zap would
hide the CallerId if sip was told to do so, but that wasn't the case.
Then I've tried to set hidecallerid=yes in zapata.conf (and restarted *) but
this only results in my main number CallerId being displayed.
Is it somehow possible to completely hide the CallerId, like when someone
from a secret number is calling and the display on my mobile says
"Secret number" ?

And if that is possible, is it then possible to do it on a per-user basis
configured via sip.conf?

regards,
Mickey Binder


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users