[Asterisk-Users] TDM card loses Dial tone

[Ulexus]

Same here.  I, too have received replacement cards from Digium, and I have 
even tried replacing the proSLICs, all to no avail.

Also to note: the same port on each (of three) cards always goes out first.

On Thursday, 12 February, 2004 19:22, John Vozza wrote:
> Same here...
>
> Usually after several of these show up in my system log:
>
> Power alarm on module 1, resetting!
>
> Need to unload/reload module wcfxs in order to get the dial tone back.
> Happens several times a week, sometimes more frequently.
>
> John
> -------------------------------------------------------------------------
> NetRom Internet Services			973-208-1339 voice
> john at netrom.com					973-208-0942 fax
> http://www.netrom.com
> -------------------------------------------------------------------------
>
> On Thu, 12 Feb 2004, Youness El Andaloussi wrote:
> > I experienced similar problems too with a 4 chan tdm400. This seems to
> > especially happen when you make configuration changes. It has nothing to
> > do with runing X or no, it does not even have to do with redhat... I
> > experienced the same problem on mandrake.
> >
> > One thing you have to be extra careful is when restarting, make sure that
> > all the modules have entirely reloaded before expecting a dialtone with
> > an asterisk debug console "asterisk -rvvvv"... many of the times I
> > thought there was no dialtone and the asterisk process had gone cukoo, I
> > noticed that configuration was not entirely reload.
> >
> > Yet, reloading many times seems to get some of the TDM400 channels
> > hung.  On the other hand, this problem does not seem to happen as
> > extensively when no reloads are made
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users