[Asterisk-Users] "Stuck" TE410P cards

[mattf]

I had the same problem, Digium sent me a new card and now all is well.

MATT---


-----Original Message-----
From: Scott Stingel [mailto:scott at evtmedia.com]
Sent: Wednesday, February 11, 2004 1:03 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] "Stuck" TE410P cards


Hello all-

I have 3 TE410P cards in service in the field.  Two of them have an regular
problem that they get "stuck" during a system reboot.  What I mean is that
they display no LED's during any part of the restart, and they are not seen
by the drivers during or after the reboot.

The only thing that brings them back to life is to power down and restart
the box they are in.  Even pressing the reset button on the processor does
not clear their state.

This sounds very much like a hardware problem with the cards, since one
would assume normally that a front panel reset would clear a stuck card.
Has anyone else experienced these symptoms?  This happens fairly regularly
on two of the three TE410P cards.  It does not happen with older cards such
as the E400P, of which I have several.

Thanks

Scott M. Stingel 
Emerging Voice Technology Inc.
Palo Alto, California and London, England
Email:          scott at evtmedia.com  
URL:            www.evtmedia.com  

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users