[Asterisk-Users] Re: DISA

[Ed Devine]

Yes I have tried immediate = yes.

I do get dialtone immediately when I go off-hook or dial in, but then
Asterisk won't accept any further input whether dialing from the Norstar or
dialing on the T1 side. Essentially, I can't break dialtone.

----- Original Message ----- 
From: "Robert Hajime Lanning" <lanning+asterisk at monsoonwind.com>
To: <asterisk-users at lists.digium.com>
Sent: Friday, February 06, 2004 1:45 PM
Subject: Re: [Asterisk-Users] Re: DISA


> What is your zapata.conf?
> Have you tried "imediate = yes"?
>
> <quote who="Ed Devine">
> > John and sundry others:
> >
> > First thanks for your help.
> >
> > You have succiently summed up the problem. I do not get dialtone fast
> > enough.
> >
> > The following is a test dialplan that I set up this morning after
recieveing
> > the many kind e-mails, It's very basic, but it does allow me to process
a
> > call to my phone extension, albeit I still don't get dialtone
immediately
> > when I select a line or dial into the asterisk system. (see embedded
notes
> > for details).
> >
> > [general]
> > static = yes
> > writeprotect = no
> > ;
> > [main2]
> > exten => 9,1,dial(zap/g2)
> > exten => _5012
> > ignorepat => 9
> > ;
> > [main1]
> > exten => s,1,DISA(2285750,main2)
> > exten => s,2,Hangup( )
> > ;
> > ;Notes on testing:
> > ;Circuit is a full T1 provided by my in house Nortel
> > ;SL1 to port 3 of my Digium T410p. It's identified
> > ;in zaptel.conf as span =3,0,0,d4,ami., and configured
> > ;in zapata.conf as group=2, signalling=em_w,
> > ;channel = 49-72.
> > ;
> > ;For purposes of testing only, I have my Nortel Norstar
> > ;system with a T1 cartridge attached to port 4 of the
> > ;Digium T410p. It's identified in zaptel.conf as
> > ;span=4,0,0,esf,b8zs and configured in zapata.conf as
> > ;group=3, signalling=em_w, channel = 73-96.
> > ;
> > ;ztcfg -vv indicates the configuration is correct, and
> > ;zttool indicates that there are no errors
> > ;
> > ;When I select line 1 on the Norstar (where I would
> > ;normally expect to  to get dialtone, in effect simply
> > ; going off hook) . I do not get dialtone.
> > ;
> > ;CLI indicates "Starting simple switch on 'Zap-73-1' ".
> > ;The same hold true if I dial in on this T1.
> > ;
> > ;after 5 seconds (the timeout), I finally recieve dialtone.
> > ;
> > ;At this point I dial "2285750#" and I get dialtone again
> > ;
> > ; CLI indicates "WARNING [1225991448]:
> > ;app_disa_c:290 : disa_exec: DISA on Zap/73-1
> > ;password is good".
> > ;
> > ;The dialplan then branches to [main2]
> > ;
> > [main2]
> > exten => 9,1,dial(zap/g2)
> > exten => _5012,1,dial(zap/g2)
> > ignorepat => 9
> > ;
> > ;Since both the Norstar and the SL1 are configured with
> > ;dial 9 access (and yes, I've tried using straight access
> > ;with the same results). I dial 995012, and the call
> > ;processes, ringing my extension 5012 on the SL1.
> > ;
> > ;CLI indicates
> > ;'Executing dial("Zap/73-1 , Zap/g2) in new stack'.
> > ;Called g2
> > ;'Zap/49-1 answered Zap/73-1'
> > ;'attempting native bridge of Zap/73-1 and Zap/49-1'
> > ;
> > ;I answer the call on my extension '5012' and talk as long
> > ;as I care and then simply hangup.
> > ;
> > ;CLI indicates 'Hungup 'Zap/49-1'
> > ;'spawn extension (main2,9,1) exited non-zero on
> > ;Zap/73-1'
> > ;Hungup 'Zap/73-1'
> > ;
> > [default]
> > exten => s,1,answer
> > exten => s,2,disa(no-password, main2)
> > exten => s,3,Hangup
> > ;
>
> -- 
> END OF LINE
>        -MCP
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>