[Asterisk-Users] Adding another X100P Card

[Steven E. Frazier]

History:

1. Added X100P to my system
2. Added Sipura
3. Added TDM400P (2 port)
Worked fine so far
4. Now I want to add an additional X100P

My question is...is the following configs files ok and is there any issue
with adding the X100P (channel 4) after my 2 analog FXS channels?  

Thanks.

Steve



Here is my /etc/zaptel.conf

fxsks=1,4
fxols=2-3
loadzone = us
defaultzone = us


Here is my /etc/asterisk/zapata.conf

; Zapata telephony interface sample configuration file
;
[channels]
;
; X100P plugged into PSTN
; X100P # 1
context=incoming
signalling=fxs_ks
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
busydetect=no
callprogress=no
musiconhold=default
usecallerid=yes
callerid=asreceived
channel => 1
;
;
;
; TDM200B Port #1 plugged into analog Phone
; 
;
context=toll-access
signalling=fxo_ls
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
musiconhold=default
usecallerid=yes
callerid="Livingroom" <2201>
mailbox=2201
channel => 2
;
; TDM200B Port #2 
; 
;
context=toll-access
signalling=fxo_ls
callwaiting=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
musiconhold=default
usecallerid=yes
callerid="Kitchen" <2202>
mailbox=2202
channel => 3

; X100P # 2
context=incoming
signalling=fxs_ks
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=1.5
txgain=1.5
immediate=no
busydetect=no
callprogress=no
musiconhold=default
usecallerid=yes
callerid=asreceived
channel => 4