[Asterisk-Users] Sipura 3000 inbound FXO problem

[Steven P. Donegan]

Kristian Kielhofner wrote:

> Steven P. Donegan wrote:
>
>> Kristian Kielhofner wrote:
>>
>>> Steven P. Donegan wrote:
>>>
>>>> I have a Sipura 3000, apparently configured correctly, when 
>>>> incoming calls arrive on the telco port they arrive properly on the 
>>>> Asterisk system - however they don't get routed properly. The 
>>>> Asterisk message:
>>>>
>>>> Dec 30 07:47:16 NOTICE[2745]: chan_sip.c:7486 handle_request: 
>>>> Failed to authenticate user WIRELESS CALLER 
>>>> <sip:714XXXXXXX at 1.0.24.5>;tag=7f8072c0c46250f7o1
>>>>
>>>> X's are there to not advertise my phone number :-)
>>>>
>>>> Any idea as to why any kind of authenticate would be done or would 
>>>> fail would be appreciated.
>>>
>>>
>>>
>>>
>>> Steven,
>>>
>>>     It really seems like you need to setup an entry in sip.conf that 
>>> "PSTN Line" on the sipura can register with.  Do you have an entry 
>>> in sip.conf for it?  How is "PSTN Line" programmed?
>>>
>>> -- 
>>> Kristian Kielhofner
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>>
>> Here is sip show peers:
>>
>> www*CLI> sip show peers
>> Name/username    Host            Dyn Nat ACL Mask             
>> Port     Status  1004/1004        1.0.24.223       D          
>> 255.255.255.255  5060     Unmonitored
>> 1003/1003        1.0.24.223       D          255.255.255.255  
>> 5060     Unmonitored
>> 1002/1002        1.0.24.222       D          255.255.255.255  
>> 5061     Unmonitored
>> 1001/1001        1.0.24.222       D          255.255.255.255  
>> 5060     Unmonitored
>> 1000/1000        (Unspecified)    D          255.255.255.255  
>> 0        Unmonitored
>> 5 sip peers loaded [4 online , 1 offline]
>>
>> Which seems to say the Sipura is registered...
>
>
> ...snip..
>
> Steven,
>
>     You need to create another "friend" for the Sipura FXO.  You then 
> need to configure "PSTN Line" to register as that user.  You need to 
> make sure that context= for your new friend allows the Sipura to 
> forward those PSTN calls to where they need to go.
>
>     Think of it like this - on a Sipura 2000, you have lines 1 + 2.  
> On a Sipura 3000 your have lines 1 + 2 - it just so happens that they 
> call line 2 "PSTN Line".  It still needs valid login information to 
> get to *.
>
> Example (1003 is the Sipura 3000 Line 1 user):
>
> [1003]
> type=friend
> username=1003
> secret=1003
> canreinvite=no
> host=dynamic
> dtmfmode=rfc2833
> mailbox=1003
> nat=no
> disallow=all
> allow=ulaw
>
> [1003-in] <--- can be anything, so long as you know what it is
> type=friend
> username=1003-in
> secret=1003-in
> canreinvite=no
> host=dynamic
> context=friends <---- set to whatever you need it to be
> dtmfmode=rfc2833
> nat=no
> disallow=all
> allow=ulaw
>
>     Then, configure "PSTN Line" on the 3000 to register with your * 
> machine as 1003-in.  Hopefully this helps.
>
> -- 
> Kristian Kielhofner
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
The Sipura has registration entries in sip.conf for both lines - and 
from my earlier post appears to register just fine. I'm still clueless 
on the failure originally reported.