[Asterisk-Users] Voicemail and Zapatel

[Lyle Giese]

Is your X100P set for loop start or Kewl Start?  I am betting loop start,
try changing to ks instead.

Lyle

----- Original Message ----- 
From: "Adi Linden" <adil at adis.on.ca>
To: <asterisk-users at lists.digium.com>
Sent: Thursday, December 30, 2004 11:08 AM
Subject: [Asterisk-Users] Voicemail and Zapatel


> My PSTN line doesn't allways hang up properly after it goes to voicemail.
> The problem occurs when a caller hangs up during the initial greeting.
> Even though the hangup accured, voicemail continues to record, usually a
> fast busy and/or a teleco generated "please hangup now" message. After the
> voicemail.conf 'maxmessage=180' expires the line simply stays offhook.
>
> The hardware is a X100P card and this is my extensions.conf for incoming
> PSTN calls:
>
> ; Parameters for calls from PSTN
> PSTN_RNG_EXTEN=SIP/251&SIP/261&SIP/211
> PSTN_RNG_TIME=20                       ; 20 seconds are about 6 rings
>
> [inbound-pstn-local]
> ;
> ; Our local telephone line. We do not have caller ID so we set it to
> ; a sensible value.
> ;
> exten => s,1,SetCallerID(Outside Caller <7377296>)
> exten => s,2,Dial(${PSTN_RNG_EXTEN},${PSTN_RNG_TIME},tr)
> exten => s,3,Voicemail(u01)
> exten => s,4,Hangup
> exten => s,103,Voicemail(b01)
> exten => s,104,Hangup
>
> Adi
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>