[Asterisk-Users] FC3, TDM11B (DEVPCI) and asterisk

[C F]

Do a make config in /usr/src/zaptel this will take care of the init.d script.


On Tue, 28 Dec 2004 04:48:50 -0500, Jeff <jsoehner at the-techy.com> wrote:
> Thanks for the response but it turned out to be two tiered...
> 
> I had to run ztcfg manually because it was not run in the init script.
> 
> I was able to get it to work on another motherboard. (using the technique
> above)
> 
> After two days a fiddling, compiling, etc I started dreaming about these
> files ;-)
> 
> Great product!
> 
> Jeff
> ----- Original Message -----
> From: "C F" <shmaltz at gmail.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Monday, December 27, 2004 11:44 PM
> Subject: Re: [Asterisk-Users] FC3, TDM11B (DEVPCI) and asterisk
> 
> > Yes I do. Post the zapata.conf, zaptel.conf and the extensions.conf,
> > i'll see what I can do.
> >
> >
> > On Fri, 24 Dec 2004 18:49:27 -0500, Jeff <jsoehner at the-techy.com> wrote:
> > > Hey folks;
> > >
> > >  I am a old Dialogic telephony hack and have tried asterisk a while back
> on
> > > a laptop with the OSS module and I liked what I saw. I recently came
> across
> > > some info regarding asterisk 1.0 and thought I should give it a go. I
> used a
> > > AMD K7 MB, compiled the binaries without a real problem and realized
> that I
> > > might have a sound card issue because I couldn't hear the messages but
> the
> > > demo worked otherwise. I noticed that my sound card was having a problem
> so
> > > I abandoned that approach but I'm not finished just yet.
> > >
> > > I then decided to get a DEV kit and give it a real go. I compiled the
> > > binaries (zaptel and asterisk) without incident and I was able to start
> the
> > > drivers. I have green lights on port 1 and 4 and I understand that port
> 1 is
> > > the station port (for a 2500 set regular phone set?) and that port 4 is
> able
> > > to connect to a regular 1FL (simple pots line).
> > >
> > > I used some 'examples' from the Digium site and when that didn't work I
> used
> > > a few from a link I found
> > > (http://iheavy.com/modules.php?op=modload&name=News&file=article&sid=35)
> but
> > > I have no dialtone on the phone and it won't pickup (or write ANY logs)
> when
> > > I call the line.
> > >
> > > My question(s) for the list is/are;
> > >
> > > Does anyone have a working asterisk system using zaptel TDM cards on FC3
> > > with kernel  2.6.9-1.681_FC3 and if so, is there something that I am
> > > missing?
> > >
> > > Any tips would be appreciated and thanx in advance.
> > >
> > > Jeff
> > >
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>