[Asterisk-Users] Asterisk / 183 message

[Joshua Colp]

Progressinband=yes under [general] in sip.conf

NEXT!!!

- Joshua Colp.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dave DeChellis
Sent: Tuesday, December 28, 2004 8:57 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Asterisk / 183 message

Hello,

My company is doing some * testing with our Class 5 softswitch and had 
some questions regarding ringback being provided to our PSTN users (off 
--> on net calling)

Currently with MGCP subscribers, we know the PSTN ringing is provided by 
a digital PBX for example,    However, it looks like with SIP, our 
softswitch is relying on MGCP signaling on our PSTN gateways to provide 
ringback to the PSTN network - this makes complete sense (gateway to 
PSTN gets a S: rg).

The problem is that some of our older gateways don't support MGCP event 
signaling, so I was trying to get Asterisk to send all SIP calls to our 
switch with a "183" message so maybe our switch will cut the call 
through two-way immediately.  Currently Asterisk is sending 180/ringing 
messages to our switch. 

Is there a way to have Asterisk send 183 messages to my peer defined in 
sip.conf ?

Thanks,
Dave




_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users