[Asterisk-Users] Zaptel/Zapata config from T410p to Brooktrout T1

[Jon Bebeau]

HI, I'm trying to config a span from port 2 of a DIgium T410p to a Brooktrout TR114-P8V-T1 card.  I have a T1-PRI from the TELCO in port 1 (thru first port) working just fine with Asterisk 1.0.3 - been working fine for some time now.  No problem with dialplan PSTN calls.  Now I'd like to "route" specific DID numbers in thru the TELCO T1-PRI and out thru the second port (span) on the Digium card to the Brooktrout T1.  The Brooktrout T1 is a robbed-bit e&m signaling.  I'm using a crossover cable and both the Digium T1 port and the Brooktrout T1 card light up green.  Yet I can't get a call through the Asterisk box to the Brooktrout.  I suspect some zaptel/zapata config problem and I'm hoping someone can spot something.

When I call the number asterisk reports:

Executing Dial("Zap/11-1", "Zap/2-2/3213214321") in new stack
Notice[2018]: app_dial.c c:743 dial_exec: Unable to create channel of type 'Zap'
= Everyone is busy/congested at this time
Accepting call from '1231231234' to '3213214321' on Channel 0/11, Span 1
Channel 0/11, Span 1 got hung up
Hangup 'Zap/11-1'

zaptel.conf

span=2,0,0,esf,b8zs
e&m=25-48

zapata.conf

signaling = em_w
context = faxserver
group = 3
channel = 25-28

exten.conf

exten => 1231231234,1,Dial(Zap/2-2/${exten})
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041222/ce14235f/attachment.htm