[Asterisk-Users] TDM400P install on Debian 2.6.10

[David Ishmael]

I had this problem when I used the TDM400P on an FC3 system.  The Wiki
helped:

http://www.voip-info.org/wiki-Asterisk+Linux+Fedora

[snippet]
Additional Notes for Zaptel if you get error message

Notice: Configuration file is /etc/zaptel.conf 
line 143: Unable to open master device '/dev/zap/ctl' 

If you edit the Zaptel Make file commit out the following lines

ifeq ($(DYNFS),)
else
       @echo "**** Dynamic filesystem detected - not creating device nodes"
       @echo "**** If you are running udev, read README.udev"
endif

Recompile Zaptel, libpri and Asterisk and you should be good to go, special
thanks to Patrick off the mailing list for the above info.
[/snippet]

Also, when I start the service, I do a sleep and keep checking for the
existence of the /dev/zap/ctl file before loading any modules which has
proven to work.

Here's the script snipet:

ls /dev/zap/ctl > /dev/null 2>&1
until [ $? -eq 0 ]; do
	sleep 1
	ls /dev/zap/ctl > /dev/null 2>&1
done


Hope that helps,

-Dave

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dorn Hetzel
Sent: Wednesday, December 22, 2004 4:23 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] TDM400P install on Debian 2.6.10


I just installed a new TDM400P with one FXO interface
in slot 4 (how it came from Digium).  This box is
running Debian with a 2.6.10-rc2-mm3 kernel.  After
the make linux26 and make install in /usr/local/src/zaptel,
I can see contents in /dev/zap but any attemp to 
touch for example /dev/zap/ctl gets a no such
device or address ...

Any suggestions?

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users