RE [Asterisk-Users] Zaphfc/BRI Configuration help

[Ian Clough]

Hi Muhammad



From: "Muhammad Talha" <talha at worldcall.net.pk>

To: "Asterisk Users Mailing List - Non-Commercial Discussion"

<asterisk-users at lists.digium.com>

Sent: Wednesday, December 22, 2004 2:07 PM

Subject: Re: [Asterisk-Users] Zaphfc/BRI Configuration help



> Thanks for lan for your reply can you share your extention.conf

> setting .

>

> this is my extention.conf lines

> [globals]

> OUTGOING => Zap/1

> exten => _9XXXXXXXXXXXX,1(${OUTGOING}/${EXTEN:1})

>

> i am trying to dial pstn through firefly using 9-55212323 ( Suppose

> this

> my Pstn number ) i get these error :

>

> SIP Status: 484 Address Incomplete

>> 19.973650 -> 192.168192.68 SIP/SDP Request: INVITE

>> sip:99042554524 at 192.168192.68, with session description 19.974283

>> 192.168192.68 -> 192.168192.33 SIP Status: 407 Proxy

> Authentication

>> Required

>> 19.983174 192.168192.33 -> 192.168192.68 SIP Request: ACK

>> sip:99042554524 at 192.168192.68 19.984367 192.168192.33 ->

>> 192.168192.68 SIP/SDP Request: INVITE sip:99042554524 at 192.168192.68,

>> with session description 19.984765 192.168192.68 -> 192.168192.33 SIP

>> Status: 484 Address

> Incomplete

>> 19.988290 192.168192.33 -> 192.168192.68 SIP Request: ACK

>> sip:99042554524 at 192.168192.68

I am quite new to this myself and I am not quite sure what is wrong there.

There are a number of ways to set up sip.conf but my entries look like:-

[jackie.clough]
context=from_SIP_extension
type=friend
regexten=1105
username=jackie.clough
secret=xxxxxxxx
callerid="Jackie Clough" <1105>
host=dynamic
nat=no
canreinvite=no
disallow=all
allow=gsm
allow=ulaw
allow=alaw



Your client (firefly) will register with asterisk and you can see the 
message on the asterisk console. The command sip show users will show you a 
list of registered users



Asterisk Ready.
*CLI>     -- Registered SIP 'jackie.clough' at 192.168.1.13 port 5060 
expires 180
    -- Saved useragent "X-Lite release 1103m" for peer jackie.clough


*CLI> sip show users
Username         Secret           Accountcode     Def.Context     ACL  NAT
rons.desk.at.in  xxxxxxxx                         from_SIP_extens No   RFC35
ians.desk.at.in  xxxxxxxx                         from_SIP_extens No   RFC35
jackie.clough    xxxxxxxx                         from_SIP_extens No   RFC35
ian.clough       xxxxxxxx                         from_SIP_extens No   RFC35
fwd-outgoing     xxxxxxxx                         from-sip        No   No
    -- Registered SIP 'jackie.clough' at 192.168.1.10 port 5060 expires 180

In extensions.conf the context from_SIP_extensions could be something like:-

[from_SIP_extension]
include => external
include => sipcalls
include => SIPextensions
include => voicemail

and the context external would be:-

[external]
; Dial 9 for an outside line. Allow any call for now
exten => _9.,1,Dial(Zap/g1/${EXTEN:1})
exten => _9.,2,Playback(invalid)
exten => _9.,3,Hangup

Where g1 is the group 1 I defined in zapata.conf

Its not very pretty but it works for me

Ian