[Asterisk-Users] E1 card for Asterisk

[telmo at n1.com]

Hi Benoit,

On Wed Dec 22  3:47 , 'B. Vallet - www.acropolistelecom.net'
<vallet at acropolistelecom.net> sent:
>Hello, I use TE405 and TE410 for more than one year, they work perfectly!

Ah! Thanks for the info.Can you tell me whether you are using them with E1 or T1, 
and with what signaling?

>For me, Digium Cards are the best choice (if they feet the need) for
>different reasons:
>1. They support Digium that is supporting Asterisk.
>2. Digium offer free support to install their card when you buy from them.
>3. I think they are more used by asterisk developers than others (so more
>stable ?)

My thoughts exactly.

Best Regards,
   Telmo.

>
>Regards,
>
>Benoit 
>
>
>-----Message d'origine-----
>De�: asterisk-users-bounces at lists.digium.com
>[asterisk-users-bounces at lists.digium.com','','','')">asterisk-users-bounces at lists.digium.com]
De la part de telmo at n1.com
>Envoy�: mercredi 22 d�cembre 2004 12:28
>�: asterisk-users at lists.digium.com
>Objet�: [Asterisk-Users] E1 card for Asterisk
>
>Hello Folks,
>
>I'm trying to decide here between a few cards for connecting an Asterisk box
>to a
>single E1 channel (either PRI or R2 signaling):
>
>- Digium E100P: has been replaced by the TE110P below, but can still be had
>at
>places like digitnetworks.com for $475, and I guess there's always a place
>for
>good-olde-obsolete cards in the world as long as they work :-)
>
>- Digium TE110P: replacement for the above card. Costs $595 at the Digium
>webstore; aditionally can be configured to work with both E1 *and* T1.
>
>- Sangoma A101: billed as "compatible with Asterisk" on Sangoma's page at
>http://www.sangoma.com/products/p_a101-102-specs.htm; also for E1 and T1,
>the
>specs list only compatibility with CAS and PRI signaling, but a pal asked
>Sangoma
>directly and they said that the card is compatible with E1/R2 signaling.
>Cost is
>also $595 at voipstore.atacomm.com.
>
>On the side of the E100P/TE110P there's my wish to support Digium in any way
>I
>can for the nice work they are doing with Asterisk; But then, I've been
>using
>Sangoma cards for almost 9 years now on data (frame-relay, PPP, etc)
>applications, and the first card I bought from them is still working on a
>production machine(!); Also, the A101 works with Linux for data-only
>connections
>too (something I understand the Digium cards can't do at the moment) and can
>be
>upgraded to a dual-E1 A102 for an additional $300.
>
>So what I would like to ask the knowledgeable guys and gals here is:
>
>1) Can anyone tell any good/bad/nice/ugly experiences with any of the above
>cards
>and Asterisk, specially in an E1/R2 configuration?
>
>2) Can anyone point me to nice on-line sellers of Asterisk-compatible
>hardware,
>specially E1 cards? The only ones I know are the Digium webstore, and the
>above
>mentioned digitnetworks.com and voipstore.atacomm.com...
>
>I'm about to spend a fair chunk of money from my own pockets in this,
>friends,
>and all your comments/suggestions/advice is very, very welcome.
>
>Thanks in advance,
>   Telmo.
>
>---- 
>SeeqMail - the only email you'll ever need Starts Here
>Sign up for FREE personalized email today: http://www.seeqmail.com
>
>http://www.Grassroots.org/ - Make Change!
>---- 
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



---- 
SeeqMail - the only email you'll ever need Starts Here
Sign up for FREE personalized email today: http://www.seeqmail.com

http://www.Grassroots.org/ - Make Change!
----