[Asterisk-Users] X100P dead?

[Lyle Giese]

OOPS!

exten => _9x,1,Dial(Zap/1/${EXTEN:1},,)

(I am having problems with the shift key and too lazy to change out my
keyboard...)

lyle

----- Original Message ----- 
From: "Lyle Giese" <lyle at lcrcomputer.net>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Tuesday, December 21, 2004 9:58 PM
Subject: Re: [Asterisk-Users] X100P dead?


> Try
>
> exten => _9x,1,Dial(Zap/1/$[EXTEN:1},,)
>
> instead of
>
> exten => _9X.,1,Dial,Zap/1/${EXTEN:1}
>
> Lyle
>
> ----- Original Message ----- 
> From: "Buu Hao Tran" <buuth at hn.vnn.vn>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Tuesday, December 21, 2004 9:43 PM
> Subject: RE: [Asterisk-Users] X100P dead?
>
>
> > [root at IPPBX asterisk]# ztcfg -vv
> >
> > Zaptel Configuration
> > ======================
> >
> >
> > Channel map:
> >
> > Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> >
> > 1 channels configured.
> >
> > Zapata.conf:
> > ;
> > [channels]
> > language=en
> > context=COline
> > signalling=fxs_ks
> > ;disallow=all
> > ;allow=alaw
> > ;allow=ulaw
> > usecallerid=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > channel => 1
> >
> > and this is a part of extensions.conf
> > [dial-out]
> > exten => _9X.,1,Dial,Zap/1/${EXTEN:1}
> > exten => _9X.,2,Goto(102)
> > exten => _9X.,102,Congestion
> > exten => _9X.,103,Hangup
> >
> > >From SIP client make a call to 9 7540114 dnd the error is
> > Executing Dial("SIP/2002-b8dd", "Zap/1/7540114") in new stack
> > Dec 21 09:26:28 NOTICE[4044]: app_dial.c:803 dial_exec: Unable to create
> > channel of type 'Zap' (cause 0)
> >   == Everyone is busy/congested at this time (1:0/0/1)
> > There is any software tool for X100P testing???
> > Thanks
> >
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of I put the
> Who?
> > in Mishehu
> > Sent: Wednesday, December 22, 2004 9:37 AM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] X100P dead?
> >
> >
> > Not to ask stupid questions, but did you configure zaptel.conf,
> > zapata.conf, and run ztcfg prior to launching asterisk?
> >
> > -mishehu
> >
> > > Hello,
> > > I have X100P card but exten => _9X.,1,Dial(Zap/1/${EXTEN:1}) does not
> > > work.
> > > The error is app_dial.c:803 dial_exec: Unable to create channel of
type
> > > 'Zap' (cause 0)
> > > Zap show channel, lspci etc show everything is normal.
> > > Because X100P is Intel 537 modem, so can I use it as true modem for
> test?
> > > Did any one use X100P as a modem?
> > > Thank you very much.
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> > > !DSPAM:41c8dc8e151274151716875!
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>