[Asterisk-Users] G729, x-pro, and codec ordering

[Kanuri, Seshu (Company IT)]

-----Original Message-----
I'm crazy here trying to make X-Pro use ONLY g729, and you're struggling
to make it not to use it :)...
Can you please indicate what's your config for X-Pro and sip.conf?
sip.conf:
[12345]
type=user
username=12345
secret=12345
nat=no
host=dynamic
reinvite=no
canreinvite=no
disallow=all
allow=g729
allow=g729a
allow=g723.1
allow=g726
allow=ulaw
allow=alaw
context=sip_default

And this is the message that asterisk shows when I try to dial from
X-Pro:

*CLI> Dec 21 18:02:49 WARNING[2375]: chan_sip.c:2764 process_sdp: No
compatible codecs!
Dec 21 18:02:50 NOTICE[2375]: chan_sip.c:7295 handle_request: Unable to
create/find channel


As soon as I enable GSM or ulaw everything goes fine... I have the
license for g729 installed. This is the output of "show g729" in the *
console:

0/0 encoders/decoders of 1 licensed channels are currently in use

Any ideas?

Thanks in advance,

RODOLFO
/SNIP/
>From your SIP.CONF...

allow=g729 		 - Keep this. This is enough
allow=g729a		 - remove this line

Also if you are using Xpro from your PC, which is connected to a router
and not having a fixed IP address, you may like to keep NAT as...

nat=yes



--Seshu 
--------------------------------------------------------
 
NOTICE: If received in error, please destroy and notify sender.  Sender does not waive confidentiality or privilege, and use is prohibited.