[Asterisk-Users] upgraded source now ata's ring but stop silence oninbound calls

[John Hill]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of John Hill
> Sent: Tuesday, December 21, 2004 8:40 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] upgraded source now ata's ring but stop silence
> oninbound calls
> 
> I was doing a daily make update for asterisk. On the 19th the new version
> compiled fine. I installed it. All of my ata 186's can call out to pstn
> etc.
> All inbound calls, the phones ring but when you pickup, just silence both
> local and remote with no complaints in the cli. I backed down to the r 1.0
> 1.0.3 on the 20th CVS-v1-0-12/20/04-18:24:52 it worked ok.
> 
> Yesterday I did a cvs update on the 1.0 source code, recompiled and now it
> does the same thing as the dev source. Calls go out no problem but inbound
> rings but are dead upon answer. I had to return to the
> CVS-v1-0-12/20/04-18:24:52 code to get it to work again.
> 
> Have I missed a configuration change somewhere?
> 
> Thanks
> John Hill
> 

I had canreinvite=yes in sip.conf I changed it to no. Still the same new
stable source has no audio on inbound calls. Stable source from the 20th
works?

--John Hill