[Asterisk-Users] Troubleshooting Asterisk

[Paul Brock]

Michael,

Success! Managed to get internal calls working no problems!!

Now... I have set up the IAX settings... still if I call an external number
it doesn’t work... now any idea how can I get the pbx to route out to
someone like voiptalk, and then to the big wide world?

I'm documenting my experiences with *, with the view to releasing some kind
of "noddy" guide on how to set this up :)

Thanks again 

Paul

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Løjtnant
Sent: 20 December 2004 10:02
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Troubleshooting Asterisk

On Fri, 17 Dec 2004 17:10:18 -0000
"Paul Brock" <Paul at westcomuk.com> wrote:

> Dec 17 17:03:03 NOTICE[9786]: rtp.c:1193 ast_rtp_raw_write: RTP
Transmission
> error to <ipaddr>:17664: Network is unreachable
> 	==Spawn extension (local, 2001, 1) exited non-zero on 'OSS/dsp'
> <<Hangup on console>>
> 
> This is set up with NAT settings all in place. For some reason I would
read
> from this that anything coming into me is being blocked??
> 
> Paul
> 

Hi Paul,

How are your Cisco's connected to *, and do they register them self on the *
if you reboot them?

How is the Cisco's configured, ip, gateway, etc. And which SIP Image do you
use?

Something you could try is setting nat=no and adding canreinvite=no to the
sip.conf

Perhaps you could turn off the Cisco's, restart * and Turn back on the
Cisco's, and send the CLI output.



-- 
Med venlig hilsen / Best regards

Michael Løjtnant - Systems Engineer
ZyXEL Communications A/S
Columbusvej 5 - 2860 Søborg
Tel (+45) 3955 0700 - Fax (+45) 3955 0707
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users