[Asterisk-Users] PA1688 Chipset IP Phones & ATA's

[Nicolas Moreau]

Hi

I updated on the phones here and at least it now logs on, use to only
work with SIP, but very quickly the host becomes unreachable.
I managed to place one call and the (Transf, HOLD & Flash keys) didn't
work either.

Nic



On Tue, 21 Dec 2004 08:55:06 +1000, Gary <gary at ausmail.com> wrote:
> On Mon, 20 Dec 2004 10:09:48 -0500, Kanuri, Seshu (Company IT) wrote:
> 
> >
> >
> >/Snip/
> >For those of you who may be interest....
> >
> >IAX2 loads are now available for the standard builds...
> >
> >http://www.aredfox.com/edownloadsiax2.htm
> >
> >Just a word of caution...
> >
> >Remember to change the ports over to 4569 from whatever.
> >
> >And don't forget to grab the palmtool from
> >
> >http://www.aredfox.com/download/tools/PalmTool.zip
> >
> >My own testing of IAX2 with both a phone and an ATA is that IAX2 is
> >working very well :-)
> >
> >Gary
> >
> >/Snip/
> >
> >Gary,
> >
> >On the Centrality site there are  several  Zip files to download.
> >What are these different versions represent?
> >What does the Suffix F and B and T represent?
> >
> >PA168X Products IAX2 Program Download
> >
> >File Name Content Format Size Update
> >PA168F.zip PA168F VER 1.40 BIN 152K 2004/12/20
> >PA168FB.zip PA168FB VER 1.40 BIN 150K 2004/12/20
> >PA168FS.zip PA168FS VER 1.40 BIN 150K 2004/12/20
> >PA168T.zip PA168T VER 1.40 BIN 150K 2004/12/20
> >IP8008.zip IP8008 VER 1.40 BIN 150K 2004/12/20
> >PingHe.zip WuChuan VER1.40 BIN 150K 2004/12/20
> >5111PHONE.zip WuChuan VER1.40 BIN 386K 2004/12/20
> >PA168P.zip PA168P VER1.40 BIN 386K 2004/12/20
> >PA168Q.zip PA168Q VER1.40 BIN 386K 2004/12/20
> >PA168S.zip PA168S VER1.40 BIN 386K 2004/12/20
> >
> >Seshu Kanuri
> 
> The different versions are for the different versions of PA1688
> phones/ata's.
> 
> In my Case, the ip PHONE is identified by its label...
> 
> Type HOP-1002  Rev 004  << the rev is important)
> Hirakawa Electronics Co Ltd
> 
> Their home page is www.5111soft.com
> 
> As its a Rev 004 its actually a PingHE load.
> if it was a Rev 008 its a 5111Phone load.
> 
> I use their ATA unit as well its an AG-168
> 
> Looking at their home page (which in typical chinese fashion is in
> Chinglish, but note the download names...
> 
> The AG-168 uses a PA168Q load.
> 
> You must research your hardware !!
> 
> Just a tip for those playing with their phones ata/'s for the first
> time...
> 
> You have a good chance of screwingup your loading, particularly with
> a wrong version.. I personally recommend playing with phones over ata's
> at first.... recovery technique ...
> 
> remember what the factory default base addess is, in majority of cases
> its 192.168.1.100 but depending upon manufacturer & model it might
> be different.
> 
> Hold the * key down whilst turning on phone, You must do this twice
> (turn on's in succession). Presto, you are back at default.
> 
> Have fun,
> 
> Gary
> .
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>