[Asterisk-Users] Quick questions ( maybe a little confidence building too )

[Sean Kennedy]

Matt Riddell wrote:

> Sean Kennedy wrote:
>
>> Second thing is this:  My office is scouting out VoIP solutions, and 
>> I have suggested an asterisk solution.  We will be getting our voice 
>> lines over 9 channels of a t1.  I feel comfortable enough with 
>> asterisk to set this up, but I am concerned about the Wildcard 
>> T100P's sound quality.  I
>
>
> First off the T100P is a T1 card, not a single FXO card like the X100P.
>
>> got the cheapy X100P clone, and it does some weird things ( example: 
>> Remote caller hangs up, and the card doesn't detect it.  Random hang 
>> ups, ect...While I haven't gotten obsesive with the config files, I have 
>
>
> Card doesn't detect hangup: make sure you have busycount=8 and 
> busydetect=yes
>
> Random Hangups: make sure you don't have callprogress=yes or 
> busycount=lower than 8
>
>> done some work trying to eliminate the problems.  No luck yet ), and 
>> while I'm guessing that's probably due to this being a "clone" and 
>> maybe my config file, I am hoping that people with the T100Ps will 
>> give me a first hand accounting on these cards before I commit to 
>> this project.
>
>
> I use the T100P card here for connection to a channel bank full of 
> FXS.  The sound quality is perfect.  I have used multiple cards 
> (X100P, TDM400P etc) for FXO termination and they have all worked 
> perfectly for me (I don't even get any echo).
>
> Let us know if those things above don't fix your problems.  Also, you 
> didn't say what country you are in, there are some additional changes 
> depending on what country (outside of the USA) you are in.
>
Could I ask how you've connected the t1s?  I'm going to be getting a 
non-pri t1 ( 9 channels of voice, the rest "off" ).  I assume I'll just 
get an rj45(ish) plug to plug into the back of the card and I'll specify 
my settings in /etc/zaptel.conf.  Does this sound about right?

Thanks again!

Sean