[Asterisk-Users] Problems with loading TE110 module

[Tamas J]

Hello!

I discovered, that I'm unable to load ther kernel module under 2.4.28.
Before that I had 2.4.26 and tryed to upgrade the kernel to 2.4.28.
After restart (reboot - soft restart) I can't load the module. When I
go back to 2.4.26 and try to load the module, I'm getting the same
problem.
Only turning off/on helps. What can I do? It's very annoying because
the box is in hosting and not easy to just restart.

The wct1xxp worked fine in the same box (with restarts also).


Any idea, hint?

Kind regards,
        Tamas

modprobe wcte11xp
/lib/modules/2.4.28-magic/misc/wcte11xp.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
      You may find more information in syslog or the output from dmesg
/lib/modules/2.4.28-magic/misc/wcte11xp.o: insmod /lib/modules/2.4.28-magic/misc/wcte11xp.o failed
/lib/modules/2.4.28-magic/misc/wcte11xp.o: insmod wcte11xp failed