[Asterisk-Users] Troubleshooting Asterisk

[Michael Løjtnant]

On Fri, 17 Dec 2004 17:10:18 -0000
"Paul Brock" <Paul at westcomuk.com> wrote:

> Dec 17 17:03:03 NOTICE[9786]: rtp.c:1193 ast_rtp_raw_write: RTP Transmission
> error to <ipaddr>:17664: Network is unreachable
> 	==Spawn extension (local, 2001, 1) exited non-zero on 'OSS/dsp'
> <<Hangup on console>>
> 
> This is set up with NAT settings all in place. For some reason I would read
> from this that anything coming into me is being blocked??
> 
> Paul
> 

Hi Paul,

How are your Cisco's connected to *, and do they register them self on the * if you reboot them?

How is the Cisco's configured, ip, gateway, etc. And which SIP Image do you use?

Something you could try is setting nat=no and adding canreinvite=no to the sip.conf

Perhaps you could turn off the Cisco's, restart * and Turn back on the Cisco's, and send the CLI output.



-- 
Med venlig hilsen / Best regards

Michael Løjtnant - Systems Engineer
ZyXEL Communications A/S
Columbusvej 5 - 2860 Søborg
Tel (+45) 3955 0700 - Fax (+45) 3955 0707