[Asterisk-Users] Zaphfc/BRI Configuration help

[Muhammad Talha]

Thanks lan 

i have chnaged
signalling = bri_cpe_ptmp 

also try changing pridialplan 

but with no luck . ztcfg -vv shows 2 channels are ok but i get no debugg output related to Zap channel 

i think problem may be in zaptel.conf 

any ideas 



    ---- Original Message ----- 
    From: Muhammad Talha 
    To: asterisk-users at lists.digium.com 
    Sent: Monday, December 20, 2004 7:29 AM
    Subject: [Asterisk-Users] Zaphfc/BRI Configuration help 


    i am having problem configuring Asterisk to Dial to pstn
    i have installed bristuff for my hfc supported card and configured Zaptel and zapata.conf and Extension.conf and sip.conf according 

    sip clients can talk to each other but i cant make to pstn

    BRI card configured in TE mode . 

    please comment whats wrong in it 

    ################
    here is zaptel.conf :
    ##################
    loadzone=nz
    defaultzone=nz
    span=1,1,3,ccs,ami
    bchan=1-2
    dchan=3

    here is zapata.conf

    switchtype = euroisdn
    signalling = bri_net_ptmp
    pridialplan=local
    echocancel=yes
    immediate=yes
    group = 1





    I think that you have the signalling wrong.
    My TE connection is set to
    signalling = bri_cpe_ptmp

    I also had to try several settings for pridialplan before I could make both local and national calls.

    Cheers

    Ian


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041220/c6665449/attachment.htm