[Asterisk-Users] Caller ID - TE405P - Telstra Onramp 10 - Australia

[Nathan Alberti]

Matt Hyne wrote:

>Hi Nathan,
>
>You shouldn't have to change the CIDRINGS - as this is for analogue CID.
>Also, Telstra don't provide CID by default on OnRamp10 lines, I think think
>they charge an additional $11/mth.
>  
>
Ahh, good to know.. I will change it back.

>I am going to play around with Asterisk connected to an OnRamp10 during the
>Christmas break.  If you get this working can you drop me a line.  I'd like
>to leverage some of your good work if possible.  I'd really love to replace
>our old PABX with Asterisk.  I've also got a couple of Cisco phones to try
>with so if I get the CID going I will let you know.
>  
>
Great, besides these few little points I have a fully working setup with 
currently ~10 79xx phones, FWD (IAX) connectivity and simtex here in 
Perth. More than happy to share my configs with you.

>What sort of ISDN card are you using ?  For now, I am going to try and hook
>an old Cisco 5350 up to the ISDN and get it to forward SIP calls to
>Asterisk, but eventually I will buy an ISDN card for the Asterisk box.
>
>  
>
We decided on the Digium quad port E1 card, purely because we want the 
asterisk box to initially sit between our PRI and legacy PBX. My next 
step it to start working with the Cisco gear as we have numerous routers 
around the place with E1 cards.

>Lastly, for the indial number (ie: destination) - how many digits does the
>OnRamp pass you ?
>  
>
That I cannot say for sure, although from memory,  when I had 
immediate=no in my zaptel.conf it was looking for the full number as an 
extension. I was not able to see this information in the intense span 
debug, I am using immediate=yes now for my IVR but I may change it and 
do some testing now I understand it a little better.

Regards,

Nathan.


>Matt
>
>  
>
>>-----Original Message-----
>>From: asterisk-users-bounces at lists.digium.com 
>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
>>Nathan Alberti
>>Sent: Tuesday, 21 December 2004 6:14 PM
>>To: asterisk-users at lists.digium.com
>>Subject: [Asterisk-Users] Caller ID - TE405P - Telstra Onramp 
>>10 - Australia
>>
>>I am having problems getting incoming caller id to work on a Telstra 
>>Onramp 10.
>>
>>I have changed "/DEFAULT_CIDRINGS 2"/
>>
>>Is there something i'm missing ?
>>
>>My Cisco 7960 just shows "asterisk"
>>
>>Thanks,
>>
>>Nathan
>>
>>[zapata.conf]
>>context=incoming
>>usecallingpres=yes
>>relaxdtmf=no
>>rxgain=0.0
>>txgain=0.0
>>busydetect=no
>>pridialplan=local
>>usecallerid=yes
>>callerid=asreceived
>>hidecallerid=no
>>callwaiting=no
>>callwaitingcallerid=no
>>threewaycalling=no
>>transfer=no
>>cancallforward=no
>>callreturn=no
>>echocancel=yes
>>echocancelwhenbridged=yes
>>echotraining=yes
>>adsi=no
>>callprogress=no
>>
>>switchtype => euroisdn
>>signalling => pri_cpe
>>callgroup => 1
>>group => 1
>>immediate => yes
>>channel => 1-10
>>
>>[extensions.conf]
>>[incoming]
>>exten => s,1,NoOp
>>exten => s,2,Wait(1)
>>exten => s,3,Answer
>>exten => s,4,DigitTimeout(5)
>>;temp addition
>>exten => s,6,Macro(reception,${INCOMING_DIAL})
>>
>>
>>linux*CLI> show channel Zap/2-1
>>-- General --
>>          Name: Zap/2-1
>>          Type: Zap
>>      UniqueID: 1103473308.3
>>     Caller ID: (N/A)
>>   DNID Digits: (N/A)
>>         State: Up (6)
>>         Rings: 1
>>  NativeFormat: 72
>>   WriteFormat: 8
>>    ReadFormat: 8
>>1st File Descriptor: 12
>>     Frames in: 1224
>>    Frames out: 1986
>>Time to Hangup: 0
>>  Elapsed Time: 0h0m24s
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>    
>>
>
>  
>