[Asterisk-Users] BRI Error with zaphfc

Ian Clough ianasterisk at intech.co.uk
Sun Dec 19 07:59:51 MST 2004 

Hi

I have a small ISDN PABX , (BRI) at home - Siemens Gigaset 4175 which has
cordless DECT extensions.
I have set up asterisk on FC3 with two HFC cards and I am using the latest
bristuff.
I am trying to use * between my ISDN line and my PABX.

One card is in TE mode and can receive and make calls OK. I can make and
receive external calls to a SIP phone.
I cannot get the other card to talk to my PABX. It is in NT mode.
If I try to call a PABX extension it rings but drops the call after a few
seconds. The PABX logs the call as a 'missed call'
I get the following debug:-

I understand Linux better than ISDN. Can anybody interpret this for me
please :-)


Ian

 pri intense debug span 2
Enabled EXTENSIVE debugging on span 2
    -- Accepting call from '12--------' to '------' on channel 0/1, span 1
(my tel no deleted :-)
    -- Executing Dial("Zap/1-1", "Zap/g2/673615") in new stack

> [ 02 ff 03 08 01 02 05 04 03 80 90 a3 18 01 89 70 07 c1 36 37 33 36 31 35
> a1 ]

> Unnumbered frame:
> SAPI: 00  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 22 bytes of data
> Protocol Discriminator: Q.931 (8)  len=22
> Call Ref: len= 1 (reference 2/0x2) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
> capability: Speech (0)
>                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode
> (16)
>                              Ext: 1  User information layer 1: A-Law (35)
> [18 01 89]
> Channel ID (len= 3) [ Ext: 1  IntID: Implicit, Other Spare: 0, Exclusive
> Dchan: 0
>                        ChanSel: B1 channel
                         ]
> [70 07 c1 36 37 33 36 31 35]
> Called Number (len= 9) [ Ext: 1  TON: Subscriber Number (4)  NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '673615' ]
> [a1]
> Sending Complete (len= 1)
    -- Called g2/673615

< [ fc ff 03 0f 59 76 01 ff ]

< Unnumbered frame:
< SAPI: 63  C/R: 0 EA: 0
<  TEI: 127        EA: 1
<   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
< 5 bytes of data
Sending TEI assign ri=22902 tei=64

> [ fe ff 03 0f 59 76 02 81 ]

> Unnumbered frame:
> SAPI: 63  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 5 bytes of data

< [ fc ff 03 0f 02 8f 01 ff ]

< Unnumbered frame:
< SAPI: 63  C/R: 0 EA: 0
<  TEI: 127        EA: 1
<   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
< 5 bytes of data
Sending TEI assign ri=655 tei=65

> [ fe ff 03 0f 02 8f 02 83 ]

> Unnumbered frame:
> SAPI: 63  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 5 bytes of data

< [ fc ff 03 0f 26 d7 01 ff ]

< Unnumbered frame:
< SAPI: 63  C/R: 0 EA: 0
<  TEI: 127        EA: 1
<   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
< 5 bytes of data
Sending TEI assign ri=9943 tei=66

> [ fe ff 03 0f 26 d7 02 85 ]

> Unnumbered frame:
> SAPI: 63  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 5 bytes of data

< [ fc ff 03 0f 05 06 01 ff ]

< Unnumbered frame:
< SAPI: 63  C/R: 0 EA: 0
<  TEI: 127        EA: 1
<   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
< 5 bytes of data
Sending TEI assign ri=1286 tei=67

> [ fe ff 03 0f 05 06 02 87 ]

> Unnumbered frame:
> SAPI: 63  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 5 bytes of data
    -- Channel 0/1, span 2 got hangup
Dec 19 08:21:47 WARNING[-188937296]: app_dial.c:406 wait_for_answer: Unable
to forward voice
    -- Hungup 'Zap/4-1'
  == No one is available to answer at this time
    -- Executing Wait("Zap/1-1", "14") in new stack

< [ fc ff 03 0f 35 eb 01 ff ]

< Unnumbered frame:
< SAPI: 63  C/R: 0 EA: 0
<  TEI: 127        EA: 1
<   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
< 5 bytes of data
Sending TEI assign ri=13803 tei=68

> [ fe ff 03 0f 35 eb 02 89 ]

> Unnumbered frame:
> SAPI: 63  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 5 bytes of data

< [ fc ff 03 0f 45 c9 01 ff ]

< Unnumbered frame:
< SAPI: 63  C/R: 0 EA: 0
<  TEI: 127        EA: 1
<   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
< 5 bytes of data
Sending TEI assign ri=17865 tei=69

> [ fe ff 03 0f 45 c9 02 8b ]

> Unnumbered frame:
> SAPI: 63  C/R: 1 EA: 0
>  TEI: 127        EA: 1
>   M3: 0   P/F: 0 M2: 0 11: 3  [ UI (unnumbered information) ]
> 5 bytes of data
    -- Channel 0/1, span 1 got hangup
  == Spawn extension (incoming, 693024, 2) exited non-zero on 'Zap/1-1'
    -- Hungup 'Zap/1-1'

************************
Dec 18 07:27:17 intechdial kernel: Zapata Telephony Interface Registered on
major 196
Dec 18 07:27:17 intechdial kernel: zaphfc: no version for "zt_receive"
found: kernel tainted.
Dec 18 07:27:17 intechdial kernel: ACPI: PCI interrupt 0000:02:05.0[A] ->
GSI 5 (level, low) -> IRQ 5
Dec 18 07:27:17 intechdial kernel: zaphfc: CCD/Billion/Asuscom 2BD0
configured at mem 0xa168400 fifo 0x4fe8000(0x2fe8000) IRQ 5 HZ 1000
Dec 18 07:27:17 intechdial kernel: zaphfc: Card 0 configured for TE mode
Dec 18 07:27:17 intechdial kernel: ACPI: PCI interrupt 0000:02:07.0[A] ->
GSI 10 (level, low) -> IRQ 10
Dec 18 07:27:17 intechdial kernel: zaphfc: CCD/Billion/Asuscom 2BD0
configured at mem 0xa188800 fifo 0x4878000(0x2878000) IRQ 10 HZ 1000
Dec 18 07:27:17 intechdial kernel: zaphfc: Card 1 configured for NT mode
Dec 18 07:27:17 intechdial kernel: zaphfc: 2 hfc-pci card(s) in this box.
Dec 18 07:32:26 intechdial kernel: Registered tone zone 3 (Netherlands)
Dec 18 07:32:31 intechdial kernel: zaphfc: empty HDLC frame received.
Dec 18 07:35:33 intechdial sshd(pam_unix)[2894]: session opened for user
root by root(uid=0)
Dec 18 07:48:43 intechdial kernel: zaphfc: empty HDLC frame received.
Dec 18 07:49:06 intechdial last message repeated 8 times
*******;
; Zapata telephony interface
;
; Configuration file

[channels]
;
; Default language
;
;language=en
;
; Default context
;
;
switchtype = euroisdn
; p2mp TE mode
signalling = bri_cpe_ptmp

; p2p TE mode
;signalling = bri_cpe
; p2mp NT mode
;signalling = bri_net_ptmp
; p2p NT mode
;signalling = bri_net

pridialplan=unknown
prilocaldialplan=local
; trust user provided callerid (clip no screening)?
pritrustusercid = yes

echocancel=yes
immediate=no
group = 1
context=incoming
channel => 1-2

signalling = bri_net_ptmp
pridialplan=local
group=2
contect=incoming
channel => 4-5
*****************

More information about the asterisk-users mailing list