[Asterisk-Users] modprobe wcfxo crashes my IBM NetFinity5000 after few seconds

[Eric Wieling aka ManxPower]

Rodolfo Grave wrote:
> The X100P card and the SCSI storage controller both have IRQ 15. Is this 
> what you thought about? What can I do to solve it?

For most systems the onlything you can do is move the cards around. 
Motherboards generally assign specific IRQs to specific slots.  So if 
you move the card to a different slot it will get a different IRQ.  Of 
course many motherboards (damn them) assign the same IRQ to more than 
one slot.  It seems that the first and last slots commonly are assigned 
the same IRQ.

If you are lucky your motherboard BIOS will let YOU assign which IRQs 
are assigned to which slots.  If you can enable APIC do so.  It will 
allow you to have up to 23 (or is it 32) IRQs.

--Eric
-- 
I am seeking part or full time employment in the Greater Toronto Area, 
My preference is part time employment with some telecommuting, but all 
offers will be considered. Contact eric at fnords.org.