[Asterisk-Users] modprobe wcfxo crashes my IBM NetFinity5000 after few seconds

[Rodolfo Grave]

Hello.

I have installed asterisk in a IBM NetFinity (single Pentium-II, SCSI 
controller, SuSE9.0, one X100P card).

The thing is that when I run "modprobe zaptel" everything seems to be ok 
(I've left the PC running after it long time and nothing happens). Then, 
after I execute "modprobe wcfxo" (it gives no messages or warnings) the 
PC reboots.

This is the output of lspci:

00:00.0 Host bridge: ServerWorks CNB20-LE Host Bridge (rev 04)
00:00.1 Host bridge: ServerWorks CNB20-LE Host Bridge (rev 02)
00:01.0 SCSI storage controller: IBM SCSI RAID Adapter [ServeRAID] (rev 0d)
00:06.0 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / 
AIC-7895 (rev 04)
00:06.1 SCSI storage controller: Adaptec AHA-2940U/UW / AHA-39xx / 
AIC-7895 (rev 04)
00:09.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 
[PCnet32 LANCE] (rev 33)
00:0a.0 VGA compatible controller: S3 Inc. 86c775/86c785 [Trio 64V2/DX 
or /GX] (rev 16)
00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 4d)
00:0f.1 IDE interface: ServerWorks: Unknown device 0210 (rev 4a)
00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04)
01:03.0 Communication controller: Tiger Jet Network Inc. Intel 537

This is the output of lsmod before running anything:

Module                  Size  Used by    Not tainted
isa-pnp                30664   0  (unused)
ipv6                  209824  -1  (autoclean)
key                    63256   0  (autoclean) [ipv6]
st                     27760   0  (autoclean) (unused)
sr_mod                 13432   0  (autoclean) (unused)
cdrom                  26752   0  (autoclean) [sr_mod]
sg                     32224   0  (autoclean)
keybdev                 1996   0  (unused)
mousedev                4084   0  (unused)
joydev                  5120   0  (unused)
evdev                   3584   0  (unused)
input                   3360   0  [keybdev mousedev joydev evdev]
usb-ohci               18664   0  (unused)
usbcore                58668   1  [usb-ohci]
raw1394                16592   0  (unused)
ieee1394              183332   0  [raw1394]
pcnet32                13728   1
mii                     2320   0  [pcnet32]
reiserfs              200084   1
aic7xxx               160652   0
ips                    37624   2
sd_mod                 12320   4
scsi_mod               97108   6  [st sr_mod sg aic7xxx ips sd_mod]

After running modprobe zaptel, this the following line is added at the 
header of lsmod output:

zaptel                188416   0  (unused)

And after modprobe wcfxo (it takes some seconds executing this):

wcfxo                   8704   0  (unused)

After this, it's just a matter of 1 minute before it reboots.

Is this some bug? some incompatibility?

Thanks in advance,

RODOLFO