[Asterisk-Users] zaphfc problem

[Muhammad Talha]

Dear all 

i have HFC supported ( Planet TA ) card installed on Redhat 9 and i have
installed bristuff 
and i can load zaptel and load zaphfc module in TE mode . and unable to load
ztdummy module properly

i get this error in /var/log/asterisk/messages

Dec 17 19:00:29 ERROR[604]: Unable to load config zapata.conf
Dec 17 19:00:29 WARNING[604]: chan_zap.so: load_module failed, returning -1
Dec 17 19:00:30 WARNING[604]: Loading module chan_zap.so failed!

this message on console 

Dec 18 11:51:28 ERROR[2103]: chan_zap.c:6318 mkintf: Unable to open channel 1:
No such device or address


here is my zaptel.conf

loadzone=nz
defaultzone=nz
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
#################

here is my zapata.conf

switchtype = euroisdn
signalling = bri_net_ptmp ;this is for a peer to multipeer network
;pridialplan=local
immediate=yes
group = 1
context=default
channel => 1-2
echocancel=yes

i get this error when ztcfg -vv

Zaptel Configuration
======================
 
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
 
Channel map:
 
Channel 01: Individual Clear channel (Default) (Slaves: 01)
Channel 02: Individual Clear channel (Default) (Slaves: 02)
Channel 03: D-channel (Default) (Slaves: 03)
 
3 channels configured.
 
ZT_CHANCONFIG failed on channel 1: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?