[Asterisk-Users] Call Queue Uniden UIP 200 not working
Jeremy Gehris
asterisk at socsystems.net
Fri Dec 17 16:17:04 MST 2004
Its working now, I have no clue as to what I did, thanks anyways for being
there :)
_____
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jeremy Gehris
Sent: Friday, December 17, 2004 6:09 PM
To: Asterisk-Users at lists.digium.com
Subject: [Asterisk-Users] Call Queue Uniden UIP 200 not working
I just got my wife this phone, and when calls come in on the queue it will
not ring, if I dial the ext it rings, here is the config from the tftp
server:
Thanks
unidencom.txt
# UIP200 Mass Configuration System Generic File
# Notes:
# 1. Lines start with '#' are comments
# 2. To leave a field value unchanged (as saved on local phone), leave value
to blank.
# 3. To set a field's value to empty, use '-' as value.
# 4. To NOT overwrite user local settings of: programmable key, one/two
touch keys, VMA
# number, VMWILampIndicator, set "OverwriteLocalSetting = NO". Default is
"YES". This
# key will ALSO affect whether or not THESE settings in uniden<MAC>.txt
be used.
# 5. Any duplicate parameters exist in both unidencom.txt and
uniden<MAC>.txt, MAC settings
# will be used.
# MAXIMUM FILE SIZE IS 10KB
# Current Limitation: No spaces allowed for a setting's value
# Version: 4.59a
#Overwrite user local settings of programmable keys, one/two touch keys, vma
settings
#If set to no, these current settings on the phone will not be overwritten.
OverwriteLocalSettings YES # must be placed on
top of config file
# Sip Settings --If only ProxyServer needed, set OutboundProxy1/Port same as
ProxyServer/Port
ProxyServer 192.168.5.117 # can be an IP
address or FDQN
ProxyServerPort 5060 # 0 to use default
port
OutboundProxy1 192.168.5.117 # can be an IP
address or FQDN
OutboundProxy1Port 5060 # enter a port
number or 0 for default (5060)
OutboundProxy2 192.168.5.117 # can be an IP
address or FQDN
OutboundProxy2Port 5060 # enter a
port number or 0 for default (5060)
EmergencyProxy 192.168.5.117
EmergencyProxyPort 5060
Registrar1 192.168.5.117 # can be an IP
address or FQDN
Registrar1Port 5060 # enter a port
number or 0 for default (5060)
Registrar2 192.168.5.117 # can be an IP
address or FQDN
Registrar2Port 5060 # enter a port
number or 0 for default (5060)
#DnsServer_1 10.0.0.13 # may not be necessary
if use DHCP
#DnsServer_2 151.165.11.201 # may not be necessary
if use DHCP
RegisterExpireSec 3600
RegisterRetrySec 90RegisterExpireLimitPercent 10
FailoverRetrySec 8
SipPort 5060
SRVRecordName - #_sip._udp.unisip.com
# options are ON or OFF
SessionTimerSupport ON
# options are ON or OFF
SessionTimerRefresher ON
SessionTimerMin 60
TimerInterval0 300
TimerInterval1 150
# Audio Settings
G711MuTxPacketLength 20
G711MuJitterBufferLength 10
G711MuJitterBufferMax 200
G711ATxPacketLength 20
G711AJitterBufferLength 10
G711AJitterBufferMax 200
G729TxPacketLength 20
G729JitterBufferLength 10
G729JitterBufferMax 200
LongHoldAlertPeriod 360
# options are ON and OFF
DiffServMode OFF
DefaultDiffServParam 192
RTPDiffServParam 160
# options are TRUNKMODE, CASCADEMODE, DISABLE
VlanMode DISABLE
VlanID 1
PcVlanID 2
TftpAddress 192.168.5.100 # save to phone and used
next time if not offered from DHCP
Q_Param 50
uniden00e01102f8ff.txt
# UIP200 Mass Configuration System Mac-based File
# Notes: Lines start with '#' are comments
# To leave a field value unchanged (as saved on local phone), leave value to
blank.
# To disable a field, use '-' as value
# MAXIMUM FILE SIZE IS 10KB
# Current Limitation: No spaces allowed for a setting's value
# Version: BS.459a
# Firmware. The items listed in this Firmware section must be in this order.
# FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate is
YES
# FimrwareFileName only used if FirmwareVersion differ from firmware ver in
Flash
AutoFirmwareUpdate YES #choices are YES and NO
FirmwareFileName uip200_459aenc.pac
FirmwareVersion BS4.59a
# Sip Settings
MyLcdDisplay 1006
MyDialNumber 1006
DisplayName Sharon
UserNameForProxy 1006
PasswordForProxy ****
UserNameForRegistrar 1006
PasswordForRegistrar ****
# Programmable Keys. Key functionality must go before key values.
ProgrammableKey1 OneTouchDial
ProgrammableKey2 OneTouchDial
ProgrammableKey3 OneTouchDial
ProgrammableKey4 OneTouchDial
ProgrammableKey5 TwoTouchDial
ProgrammableKey6 DoNotDisturb
ProgrammableKey7 VMA
ProgrammableKey8 Mute
# One and Two-touch keys. Must go after Programmable keys functionality
definitions.
# Refer to Programmable and Fixed Function Keys for usage guide
# OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial
OneTouchKey1 88
OneTouchKey2 4111
OneTouchKey3 3456
OneTouchKey4 8500
OneTouchKey5 18178583152
OneTouchKey6 18178583152
OneTouchKey7 18178583152
OneTouchKey8 18178583152
TwoTouchDigit0 3459
TwoTouchDigit1 3450
TwoTouchDigit2 4420
TwoTouchDigit3 4421
TwoTouchDigit4 4422
TwoTouchDigit5 4423
TwoTouchDigit6 4424
TwoTouchDigit7 4425
TwoTouchDigit8 4426
TwoTouchDigit9 4427
# Hotline and vmwi numbers --Must be placed after OneTouchDial's
HotLineNumber -
VmaDirectCallNo 8500 #value associating with VMA Programmable
key.
VmwiLampIndicator Enable
TimeDisplay Enable
#end of file
sip.conf
[1006]
type=friend
secret=****
host=dynamic
context=sip
callerid= "Sharon" <1006>
nat=never
canreinvite=yes
disallow=all
allow=ulaw
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041217/f9514dc5/attachment.htm
More information about the asterisk-users
mailing list