[Asterisk-Users] Red Alarm / Alarm Cleared Zaptel Issue (bug? )

[Colin Anderson]

Check with your telco. We had the same problem on 1 of our PRI's, every day
at 5:00 sharp, red alarm, with all calls cut off for 30 seconds exactly.
Turns out the equipment at the CO was going into a test loop at that time
because of a forgotten setting by a tech. Man, what a finger pointing
exercise that was. 

-----Original Message-----
From: Matthew Boehm [mailto:mboehm at cytelcom.com]
Sent: Friday, December 17, 2004 11:17 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Red Alarm / Alarm Cleared Zaptel Issue
(bug?)


I would say no because I am using the same card with all 23 bchannels and 1
dchannel connected to a Class 3 switch and its been up for about 2 weeks
solid. I do believe that the zaptel software restarts the channels every so
often but I've never gotten a red alarm before.

-Matthew
----- Original Message ----- 
From: "Brent Franks" <mwless at mindworks.net>
To: <asterisk-users at lists.digium.com>
Sent: Friday, December 17, 2004 11:28 AM
Subject: [Asterisk-Users] Red Alarm / Alarm Cleared Zaptel Issue (bug?)


> Hello,
>
> About every 2 or 3 days I notice in the messages log file:
>
> Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 2: Red Alarm
> Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 3: Red Alarm
> Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 4: Red Alarm
> Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 5: Red Alarm
> Dec 17 08:39:27 WARNING[1220]: Detected alarm on channel 6: Red Alarm
> Dec 17 08:39:32 NOTICE[1220]: Alarm cleared on channel 2
> Dec 17 08:39:32 NOTICE[1220]: Alarm cleared on channel 3
> Dec 17 08:39:32 NOTICE[1220]: Alarm cleared on channel 4
> Dec 17 08:39:32 NOTICE[1220]: Alarm cleared on channel 5
> Dec 17 08:39:32 NOTICE[1220]: Alarm cleared on channel 6
>
> Every occurance of this problem lasts specifically for 5 seconds.  After
> the 5 seconds, the alarm is cleared.
>
> This is occurring with the latest stable version, and occurred with a
> September CVS version.
>
> The hardware is a Digium T100P connected to an Adtran Total Access 750.
>
> Is anyone else seeing this problem?  Is it possible it is a bug?
>
> Thanks,
>
> - Brent
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users