[Asterisk-Users] No Caller ID Name PRI NI2.

[brian]

Yep, on one of my NI2 PRI's I had to add a wait(1) before I answer,
otherwise CallerIDName did not show 94.52% of the time. Seems like it might
be a buglet, but it didn't seem worth looking into since the fix was so
simple.


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Brian West
Sent: Wednesday, December 15, 2004 2:19 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] No Caller ID Name PRI NI2.

For callerid on NI2 don't you have to put a wait on there before you answer?
Otherwise you miss the packet with the name in it?  I think brc_ had this
same problem..

exten => s,1,Wait(2)
exten => s,2,Answer

bkw



> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Chris Modesitt
> Sent: Wednesday, December 15, 2004 12:50 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Subject: RE: [Asterisk-Users] No Caller ID Name PRI NI2.
> 
> Included is my debug.
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
> creslin at digium.com
> Sent: Wednesday, December 15, 2004 11:57 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] No Caller ID Name PRI NI2.
> 
> On Wed, Dec 15, 2004 at 10:52:07AM -0700, Chris Modesitt wrote:
> > Okay, now I am really confused.  I have two PRI's coming in from two
> > different Carriers (QWEST and ELI), both of them are supposed to be
> setup
> to
> > pass name and number on incoming calls.  Problem that I am having is
> that
> I
> > am not receiving inbound caller id name on either PRI, the only thing
> that
> > both carriers have in common is that I am terminating into a DMS switch
> at
> > the carrier.
> >
> >
> >
> > Observations:
> >
> >
> >
> > Caller ID Name dose not show up in the CDR records.
> >
> > PRI intense debug never sees the FACILITY IE message.
> 
> Can you post the pri intense debug so that we can look at it?
> 
> Matthew Fredrickson