[Asterisk-Users] No Caller ID Name PRI NI2.

[Chris Modesitt]

>There was no SETUP message in that debug.  You need to start the debug
>before you place your inbound call from the telco so that I can see
>the SETUP message that usually contains the IE that has this information
>in it.

>Matthew Fredrickson

Sorry Had the wrong debug options on, this shows all of the call setup.

Thanks Again

Chris.
-------------- next part --------------
< Protocol Discriminator: Q.931 (8)  len=42
< Call Ref: len= 2 (reference 852/0x354) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a2]
< Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer capability: Speech (0)
<                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode (16)
<                              Ext: 1  User information layer 1: u-Law (34)
< [18 03 a9 83 96]
< Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
<                        ChanSel: Reserved
<                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
<                       Ext: 1  Channel: 22 ]
< [6c 0c 21 83 38 30 31 37 38 37 34 39 30 36]
< Calling Number (len=14) [ Ext: 0  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1)
<                           Presentation: Presentation allowed of network provided number (3) '8017874906' ]
< [70 0b a1 38 30 31 34 33 37 37 38 36 30]
< Called Number (len=13) [ Ext: 1  TON: National Number (2)  NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) '8014377860' ]
-- Making new call for cr 852
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
> Protocol Discriminator: Q.931 (8)  len=10
> Call Ref: len= 2 (reference 852/0x354) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 03 a9 83 96]
> Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
>                        ChanSel: Reserved
>                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
>                       Ext: 1  Channel: 22 ]
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 852/0x354) (Terminator)
> Message type: ALERTING (1)
> [1e 02 81 88]CLI> 
> Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
>                               Ext: 1  Progress Description: Inband information or appropriate pattern now available. (8) ]
< Protocol Discriminator: Q.931 (8)  len=9
< Call Ref: len= 2 (reference 852/0x354) (Originator)
< Message type: DISCONNECT (69)
< [08 02 80 90]
< Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: User (0)
<                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
-- Processing IE 8 (cs0, Cause)
NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Disconnect Indication, peerstate Disconnect Request
> Protocol Discriminator: Q.931 (8)  len=9
> Call Ref: len= 2 (reference 852/0x354) (Terminator)
> Message type: RELEASE (77)
> [08 02 81 90]
> Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
>                  Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
< Protocol Discriminator: Q.931 (8)  len=5
< Call Ref: len= 2 (reference 852/0x354) (Originator)
< Message type: RELEASE COMPLETE (90)