[Asterisk-Users] TDM400p FXO module always offhook

[m. smadi]

Carey Pillar wrote:

>I have a TDM400p with 3 FXS mods and 1 FXO mod.  I have all set up with
>what seems to be correct settings (according to digium and asterisk wiki).
> As soon as I plug in my POTS line into FXO mod the line goes into offhook
>state (whether I have power to the card or not).  Should this happen? 
>When I try to call * box all I get is busy signal.  I've installed stable
>version, cvs version, change the phone cord from 2 wire to 4 wire. My
>config files are standard from compile and all i've added is info from
>digium's basic hardware configs.
>
>Any suggestions?
>  
>
1 - the FXO goes the PSTN and not to the phone.
2- in zaptel and zapta conf files beware that the signalling is 
reveresed which is somewhat confusing. Look at the documentation on the 
digium website

moe smadi