[Asterisk-Users] Verizon PRI Setup Problems

[Noah Miller]

Hi -

Thanks for the fast response!

> Try changing your dial statment to use a group instead such as 
> Dial(Zap/g2/3055551212)

Same result:
Spawn extension (from-sip, 000, 1) exited non-zero on 'SIP/2000-8dca'
     -- Executing Dial("SIP/2000-a4f1", "Zap/g1/19142246402") in new 
stack
Dec 14 22:11:09 NOTICE[1506]: app_dial.c:800 dial_exec: Unable to 
create channel of type 'Zap' (cause 0)
   == Everyone is busy/congested at this time
     -- Executing Congestion("SIP/2000-a4f1", "") in new stack
   == Spawn extension (from-sip, 19142246402, 2) exited non-zero on 
'SIP/2000-a4f1'


> Also what does the console diasplay when you dial into the asterisk 
> server.

Nothing, even with extreme verbosity and pri debugging on.


> What is the reslt of:
>
> pri show span 1

pri show span 1
Primary D-channel: 24
Status: Provisioned, Down, Active
Switchtype: National ISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T313 Timer: 4000
N200 Counter: 3


The "Status" has me concerned - "Provisioned, Down, Active".  Is that 
"Down" normal?

Thanks,
Noah



>
>
> Date: Tue, 14 Dec 2004 21:27:11 -0500
> From: Noah Miller <noah at rosecompanies.com>
> Subject:  - Only Busy and
> 	Congestion
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> 	<asterisk-users at lists.digium.com>
> Message-ID: <D366A001-4E40-11D9-B619-000393971C6E at rosecompanies.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
>
> Hi -
>
> We're moving up in the world to a PRI (Verizon), and I'm having some 
> problems with it.  I'm new to this PRI thing, though, so maybe I've 
> just screwed up a simple config detail.  I've got a TE410P on a Dell 
> PE1600SC (ServerWorks Chipset).  The card itself has a green light for 
> the PRI, and Zttool shows Span1 as "OK".  All I'm getting when I call 
> into any of the pri lines, though, is a slow busy.  I can't see 
> anything from the asterisk end - it looks as though I'm not calling.
> When I call out, I just get a fast busy congestion tone, and asterisk 
> says all the channels are busy:
>
> *CLI> pri debug span 1
> Enabled debugging on span 1
>      -- Executing Dial("SIP/2000-28df", "Zap/2/19142246402") in new 
> stack Dec 14 21:01:52 NOTICE[1437]: app_dial.c:800 dial_exec: Unable 
> to create channel of type 'Zap' (cause 0)
>    == Everyone is busy/congested at this time
>      -- Executing Congestion("SIP/2000-28df", "") in new stack
>    == Spawn extension (from-sip, 19142246402, 2) exited non-zero on 
> 'SIP/2000-28df'
>
> Here are my configs for the TE410P:
> zaptel.conf:
> span=1,1,0,esf,b8zs
> bchan=1-23
> dchan=24
>
> zapata.conf:
> switchtype = national
> context = incoming
> signalling = pri_cpe
> group = 1
> channel => 1-23
>
> Have I screwed up the config, or do I need to bug Verizon?
>
> Thanks,
> Noah
>