[Asterisk-Users] Uniden UIP200
Leif Madsen
leif.madsen at gmail.com
Tue Dec 14 12:05:29 MST 2004
On Tue, 14 Dec 2004 03:22:47 -0600, Justin Carlson <justin at lach.net> wrote:
> If anyone has a working unidencomm.txt and uniden<MACOFPHONE.txt file Could
> you please post it.
Hi Justin,
I am using the UIP200 here at home. Find pasted my configuration
files. Note that I haven't tested everything in the file, but basic
functionality (inbound and outbound calling) definately works. As
does the MWI. This is based on the 4.59a firmware. Different
firmwares may have different configurations?
uniden<MACOFPHONE>.txt
----------------------
# UIP200 Mass Configuration System Mac-based File
# Notes: Lines start with '#' are comments
# To leave a field value unchanged (as saved on local phone), leave
value to blank.
# To disable a field, use '-' as value
# MAXIMUM FILE SIZE IS 10KB
# Current Limitation: No spaces allowed for a setting's value
# Version: BS.459a
# Firmware. The items listed in this Firmware section must be in this order.
# FirmwareVersion and FirmwareFileName only used if AutoFirmwareUpdate is YES
# FimrwareFileName only used if FirmwareVersion differ from firmware
ver in Flash
AutoFirmwareUpdate YES #choices are YES and NO
FirmwareFileName uip200_459aenc.pac
FirmwareVersion BS4.59a
# Sip Settings
MyLcdDisplay 1001
MyDialNumber 1001
DisplayName Apartment 1406
UserNameForProxy 1001
PasswordForProxy 1001
UserNameForRegistrar 1001
PasswordForRegistrar 1001
# Programmable Keys. Key functionality must go before key values.
ProgrammableKey1 OneTouchDial
ProgrammableKey2 OneTouchDial
ProgrammableKey3 OneTouchDial
ProgrammableKey4 OneTouchDial
ProgrammableKey5 TwoTouchDial
ProgrammableKey6 DoNotDisturb
ProgrammableKey7 VMA
ProgrammableKey8 Mute
# One and Two-touch keys. Must go after Programmable keys
functionality definitions.
# Refer to Programmable and Fixed Function Keys for usage guide
# OneTouchKeyX value is used ONLY when ProgrammableKeyX is OneTouchDial
OneTouchKey1 1000
OneTouchKey2
OneTouchKey3
OneTouchKey4 1601
OneTouchKey5 2001
OneTouchKey6
OneTouchKey7 8500
OneTouchKey8
TwoTouchDigit0
TwoTouchDigit1
TwoTouchDigit2
TwoTouchDigit3
TwoTouchDigit4
TwoTouchDigit5
TwoTouchDigit6
TwoTouchDigit7
TwoTouchDigit8
TwoTouchDigit9
# Hotline and vmwi numbers --Must be placed after OneTouchDial's
HotLineNumber -
VmaDirectCallNo 8500 #value associating with VMA Programmable key.
VmwiLampIndicator Enable
TimeDisplay Enable
#end of file
unidencom.txt
-------------
# UIP200 Mass Configuration System Generic File
# Notes:
# 1. Lines start with '#' are comments
# 2. To leave a field value unchanged (as saved on local phone), leave
value to blank.
# 3. To set a field's value to empty, use '-' as value.
# 4. To NOT overwrite user local settings of: programmable key,
one/two touch keys, VMA
# number, VMWILampIndicator, set "OverwriteLocalSetting = NO".
Default is "YES". This
# key will ALSO affect whether or not THESE settings in
uniden<MAC>.txt be used.
# 5. Any duplicate parameters exist in both unidencom.txt and
uniden<MAC>.txt, MAC settings
# will be used.
# MAXIMUM FILE SIZE IS 10KB
# Current Limitation: No spaces allowed for a setting's value
# Version: 4.59a
#Overwrite user local settings of programmable keys, one/two touch
keys, vma settings
#If set to no, these current settings on the phone will not be overwritten.
OverwriteLocalSettings YES # must be placed
on top of config file
# Sip Settings --If only ProxyServer needed, set OutboundProxy1/Port
same as ProxyServer/Port
ProxyServer 192.168.1.1 # can be an IP
address or FDQN
ProxyServerPort 0 # 0 to use default port
OutboundProxy1 192.168.1.1 # can be an IP
address or FQDN
OutboundProxy1Port 0 # enter a port
number or 0 for default (5060)
Registrar1 192.168.1.1 # can be an IP
address or FQDN
Registrar1Port 0 # enter a port
number or 0 for default (5060)
RegisterExpireSec 3600
RegisterRetrySec 90
Q_Param 50
RegisterExpireLimitPercent 10
FailoverRetrySec 8
SipPort 5060
SRVRecordName - #_sip._udp.unisip.com
# options are ON or OFF
SessionTimerSupport ON
# options are ON or OFF
SessionTimerRefresher ON
SessionTimerMin 60
TimerInterval0 300
TimerInterval1 150
# Audio Settings
G711MuTxPacketLength 20
G711MuJitterBufferLength 10
G711MuJitterBufferMax 200
G711ATxPacketLength 20
G711AJitterBufferLength 10
G711AJitterBufferMax 200
G729TxPacketLength 20
G729JitterBufferLength 10
G729JitterBufferMax 200
LongHoldAlertPeriod 360
# options are ON and OFF
DiffServMode OFF
DefaultDiffServParam 192
RTPDiffServParam 160
# options are TRUNKMODE, CASCADEMODE, DISABLE
VlanMode DISABLE
VlanID 1
PcVlanID 2
#TftpAddress 10.1.0.17 # save to phone and
used next time if not offered from DHCP
TimeZone -5
# choices are YES and NO
EnableDST YES
# choices are YES and NO
EnableSNTP yes
# SNTP Server IP address
SntpServerIP 192.168.1.1
# Time period (in seconds) before recontacting SNTP server
SntpRetrySec 1800
# preferred codec are listed from most preferred, separated by commas
and NO space
PreferredCodec g711u,g711a,g729
# choices are English, Spanish, and French
Language English
#choices are Enable and Disable
CallWaiting Enable #
EmergencyProxyPrefix **
#Admin password must be numeric. Max is 6 digits. Format:
oldpassword/newpassword
AdminPassword 1234/1111
#end_of_file
sip.conf entry
--------------
[1001]
; uniden uip200
type=friend
username=1001
secret=1001
qualify=yes
nat=never
host=dynamic
canreinvite=no
context=administrator
dtmfmode=rfc2833
;disallow=all
;allow=ulaw
mailbox=1001
HTH,
Leif Madsen.
http://www.leifmadsen.com
More information about the asterisk-users
mailing list