[Asterisk-Users] Asterisk Randomly Hanging up on Zap channels

[Jared Armstrong]

I actually had this same problem even with busycount=8 so I had to
remove the busy detect all together.

Jared Armstrong

-----Original Message-----
From: Eric Wieling aka ManxPower [mailto:eric at fnords.org] 
Sent: Tuesday, December 14, 2004 10:27 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Asterisk Randomly Hanging up on Zap
channels

Jean-Michel Hiver wrote:
> Hi List,
> 
> I've got * randomly hanging up on inbound or outbound calls on zap 
> channels. I use a Digitnetworks X100P clone card. Any idea of what
might 
> be happening?

This problems is usually caused by callprogress=yes in 
/etc/asterisk/zapata.conf or busydetect=yes.  You can reduce the number 
of hangups if you use busycount=6 or 8 when using busydetect=yes, but 
there's no way I know of fixing the problems with callprogress=yes

-- 
I am seeking part or full time employment in the Greater Toronto Area, 
My preference is part time employment with some telecommuting, but all 
offers will be considered. Contact eric at fnords.org.