[Asterisk-Users] How to connect * to Adtran 600?

[Robert Augustyn]

Gregory,
Thanks for your input I had gove through a lot on that
web site and I am still missing someting, I think ...I
am not sure where and how I get FXOs configured?
If I use T100P to connect to Adtran where am I going
to connect the T1 comming from my Telco?

Thanks in advance.
robert

--- Gregory Junker <gregory.junker at dayark.com> wrote:

> http://www.voip-info.org/wiki-Asterisk+Channel+Bank
> 
> Digium T100P, T1 cable to Adtran T1 port, extensions
> to Adtran FXS 
> interfaces. Follow the instructions on the Wiki for
> configuring the 
> T100P both in /etc/asterisk/zapata.conf and
> /etc/zaptel.conf. Configure 
> the ports on the Adtran per the Adtran manual and
> you should be off and 
> running.
> 
> Greg
> 
> Robert Augustyn wrote:
> >     Hi,
> > 
> >     I have been looking on that unit to be used as
> source of fxs ports.
> > 
> >     Now I am not sure how I can get * box talking
> to it?
> > 
> >     Thanks for advice.
> > 
> >     robert
> > 
> > 
> >
>
------------------------------------------------------------------------
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> >
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
>