[Asterisk-Users] Cisco AS5XXX to asterisk debugging.

[Jorge Verastegui G]

Hi, 

I already tested those (ulow and  g729) , and the rtp.conf  

[general]
;
; RTP start and RTP end configure start and end addresses
;
rtpstart=16384
rtpend=20000
;
; Whether to enable or disable UDP checksums on RTP traffic
;
;rtpchecksums=no
~                        


Best regards,

Jorge

On Sun, 2004-12-12 at 16:54, Henry Devito wrote:
> voice class codec 11
>  codec preference 1 g729br8
>  codec preference 2 g729r8
>  codec preference 3 gsmfr
>  codec preference 4 g726r32
>  codec preference 6 g726r16
>  codec preference 7 g723r63
>  codec preference 8 g723r53
>  codec preference 9 g726r24
>  codec preference 10 g723ar63
>  codec preference 11 g723ar53
>  codec preference 12 g711ulaw
>  codec preference 13 g711alaw
>  codec preference 14 clear-channel
> 
> Why so many codecs listed in class 11?  Asterisk can only use ulaw,alaw, or
> gsm unless licensed.  Try only listing g711ulaw for testing purposes.
> 
> 
> Make sure you have all of the correct ports for RTP listed in your rtp.conf
> file also. 
> 
> Just a thought or two.
> 
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users