[Asterisk-Users] E100P / Brazilian Telco Problem. (Urgent)

[Rich Adamson]

> This is the second time that i configure a * box using
> a E100P card. The only difference at this time is
> that i´m using another Telco and the box have more
> one card ( Wildcard - 2 FXS + 2 FXO ).
> Well , everything looks fine i don´t have any kind of
> alarms on my zttool , the board gives me a green
> signal. BUT the span is Down :(

<snip>

> voip*CLI> pri show span 1
> Primary D-channel: 16
> Status: Provisioned, Down, Active

The "Down" indicates the d-channel is not active. Likely because
your service provider has it turned down due to alarms on their
end, etc. Might also verify with your provider that channel 16
is in fact the d-channel.

Rich