[Asterisk-Users] Granstream phones message button

[Shoval Tomer]

I haven't checked if this works because I had another problem with that
firmware.

 

I have a checkpoint firewall at our main office.

 

Sip pone addresses are allowed to pass through using any kind of
protocol.

 

Calls made from within the main office to the outside pass through OK.

Calls made form the branch office fail because the firewall determines
an invalid sip header.

 

Once the firmware is updates to 1.0.5.16, it passes through just fine.

 

Anybody encounter this and find a way to handle it without upgrading the
firmware?

 

  _____  

From: Derek Conniffe [mailto:derek at rivertower.ie] 
Sent: Friday, December 10, 2004 10:42 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Granstream phones message button

 

You have to run your own tftp server, get the firmware & unzip it and
then set the budgetone to use your tftp server in its configuration then
reset the budgetone and it will reload the updated firmware and you are
back in message button business!

 

Derek

 

ps I have a few * servers on the internet - I could give you an ip
address of one with a tftp server with 1.0.5.11 firmware - im using this
version because of this message/auto-dial problem with ver 1.0.5.16

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Gerald J.
Puhl
Sent: 10 December 2004 16:59
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Granstream phones message button

Using:

Software Version:   Program--1.0.5.16    Bootloader--1.0.0.21
HTML--1.0.0.41    VOC--1.0.0.6

I will pursue changin firmware.  Is this difficult?

Gary P.

Derek Conniffe wrote:



I meant to say "downgrade to 1.0.5.11 

Derek 

Derek Conniffe wrote: 




It sounds like you might be using the broken BT firmware - are you using
1.0.5.16?  If you are you'll find that the message button and the
auto-dial feature do not work.  You can downgrade to 1.0.5.16 but I've
read that the newer [BETA?] 1.0.5.18 works too. 

Derek 

Gerald J. Puhl wrote: 




To all: 

(newbie) 
I have setup a BT 100 phone and mostly everthing is working pretty good
except for the message button.  I have place value in the appropiate
field in the web configuration but nothing seems to work.  When I press
the button the speakerphone led goes on but the phone does nothing else
(no dialtone, no sip request to *).  Does anyone have this buttton
working?  I would like to go right to voicemail. 

Gary P. 
-- 
* Prototypes * 
    * Patterns * 
    * Models * 
    * Dies * 
    * Fixtures * 

* Please visit /www.jppattern.com <http://www.jppattern.com/>
<http://www.jppattern.com/> / for more information about J.P. Pattern,
Inc. * 

------------------------------------------------------------------------


_______________________________________________ 
Asterisk-Users mailing list 
Asterisk-Users at lists.digium.com 
http://lists.digium.com/mailman/listinfo/asterisk-users 
To UNSUBSCRIBE or update options visit: 
  http://lists.digium.com/mailman/listinfo/asterisk-users 

 

 

 

-- 



  _____  

Prototypes

Patterns

Models

Dies

Fixtures

  _____  

Please visit www.jppattern.com <http://www.jppattern.com/>  for more
information about J.P. Pattern, Inc.

 

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.804 / Virus Database: 546 - Release Date: 30/11/2004


-- 
This message has been scanned for viruses and 
dangerous content by MailScanner <http://www.mailscanner.info/> , and is

believed to be clean. 
MailScanner thanks transtec Computers <http://www.transtec.co.uk/>  for
their support. 


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.804 / Virus Database: 546 - Release Date: 30/11/2004


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041210/6e49d71b/attachment.htm