[Asterisk-Users] ringing after hangup

[Jeremy Jones]

Hello,

I'm having a bit of trouble getting asterisk + tdm400p + rhino channel
bank set up just right.  The problem is a single ring on a telephone
connected to the channel bank after the line is hung up.  I've seen a
couple messages similar to this, but I haven't seen any resolutions to
the problem.

Using the tdm400p card, with the first port connected to a 24-port fxs
rhino channel bank; the second port connected to our provider's pri
line, here's /etc/zaptel.conf:

span=1,0,0,esf,b8zs
span=2,1,0,esf,b8zs
fxoks=1-24
bchan=36-47
dchan=48
loadzone=us
defaultzone=us

And /etc/asterisk/zapata.conf looks like this:

[channels]
group=1
context=default
signalling=pri_cpe
switchtype=ni1
echocancel=yes
echocancelwhenbridged=yes
callerid=asreceived
echotraining=400
channel=36-47

context=system
signalling=fxo_ks
echocancel=yes
echocancelwhenbridged=yes
callerid=asreceived
echotraining=400
threewaycalling=yes
transfer=yes
callwaiting=yes
callwaitingcallerid=yes
;
callerid = "1" <1>
channel => 1
;
callerid = "2" <2>
channel => 2
;
.. and so on...

I have tried switching the signaling from fxo_ks to fxo_ls.  When I do
that, there's no ringing after the phone is hung up, but there's no dtmf
picked up by asterisk either...

Anyone with ideas?



Thanks,
-- 
Jeremy Jones <jeremy at samnjack.com>