[Asterisk-Users] Asterisk 1.0.3 - Signaling on E100P.

[Jefferson Carvalho]

Hello list ,

I´m putting to work a new asterisk box.
I´m running * 1.0.3 with (one )
Wildcard TDM ( 2FXS* 2FXO) and
(one) E-100P.

Both boards are working well. ztcfg
don´t show me any error.
zttool list both cards as "OK"

But when i run asterisk on verbose mode
i get those errors :

 [chan_zap.so] => (Zapata Telephony)
  == Parsing '/etc/asterisk/zapata.conf': Found
    -- Registered channel 1, FXO Kewlstart signalling
    -- Registered channel 2, FXO Kewlstart signalling
    -- Registered channel 3, FXS Kewlstart signalling
    -- Registered channel 4, FXS Kewlstart signalling
Dec 11 13:27:48 ERROR[1555]: chan_zap.c:9422 setup_zap: Unknown 
signalling method 'pri_net'
Dec 11 13:27:48 ERROR[1555]: chan_zap.c:6209 mkintf: Signalling 
requested is FXS Kewlstart but line is in PRI Signalling signalling
Dec 11 13:27:48 ERROR[1555]: chan_zap.c:9141 setup_zap: Unable to 
register channel '5-19'
Dec 11 13:27:48 WARNING[1555]: loader.c:345 ast_load_resource: 
chan_zap.so: load_module failed, returning -1
  == Unregistered channel type 'Tor'
  == Unregistered channel type 'Zap'
    -- Unregistered channel 1
    -- Unregistered channel 2
    -- Unregistered channel 3
    -- Unregistered channel 4
Dec 11 13:27:48 WARNING[1555]: loader.c:440 load_modules: Loading module 
chan_zap.so failed!

--- My zaptel.conf ---

# configuracoes para o zaptel
# placa TDM c/ 2 FXs e 2 Fxo

fxoks=1-2
fxsks=3-4

# Placa E100 / E1 - 30 canais de voz (FXO )

span=1,1,0,ccs,hdb3
bchan=5-19
dchan=20
bchan=21-35
defaultzone=br
loadzone=br

--- My Zapata.conf --

[channels]

; As configuracoes abaixo fazem referencia a
; placa Wildcard TDM com 2 canais FXS w
; 2 canais FXO

signalling=fxo_ks
echocancel=128 ; You can set this to 32, 64, or 128, tweak to your needs.
echocancelwhenbridged=yes
echotraining=800 ; Asterisk trains to the beginning of the call, number 
is in milliseconds
callerid=asreceived
group=1
context=fxs ; Points to the default context of your extensions.conf
channel => 1-2

signalling=fxs_ks
;callerid=asreceived
echocancel=128 ; You can set this to 32, 64, or 128, tweak to your needs.
echocancelwhenbridged=yes
echotraining=800 ; Asterisk trains to the beginning of the call, number 
is in milliseconds
group=2
context=incoming
channel=> 3-4 ; Again if you only have one FXO module remove the '-4'

;
;
;
;
; As Configuracoes abaixo se referem a placa E1
; que disponibiliza 30 canais FXO

;group=3
switchtype=euroisdn
;signalling=pri_net
;context=incoming
;channel=> 5-19,21-35
;channel=> 21-35

Any ideas ::: ???????????

Best Regards ,

-Jefferson Carvalho