[Asterisk-Users] BT-100 Transfer!!

[Greg - Cirelle Enterprises]

At 06:29 PM 12/9/04, you wrote:
>www.grandstream.com/BETATEST
>
>----- Original Message -----
>From: "Mark Willis" <markslists at marky.nu>
>To: "'Asterisk Users Mailing List - Non-Commercial Discussion'"
><asterisk-users at lists.digium.com>
>Sent: Thursday, December 09, 2004 11:36 PM
>Subject: RE: [Asterisk-Users] BT-100 Transfer!!
>
>
> > I never could get attended transfer to work with the BT-100 on 1.0.5.16.
>Where
> > did you get 1.0.5.18? It's not anywhere obvious on Grandstream's web site.
> >
> > Mark
> >
> >
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Craig Guy
> > Sent: Thursday, December 09, 2004 02:56
> > To: altus at stormcorp.co.za; Asterisk Users Mailing List - Non-Commercial
> > Discussion
> > Subject: Re: [Asterisk-Users] BT-100 Transfer!!
> >
> > You need firmware 1.0.5.16 (Broken message button for voicemail) or
>1.0.5.18
> > (Still in Beta, phone display '403' error about once per hour for 10
>seconds
> > or so.  In order to use attended transfer you place the caller on hold by
> > pressing the flash button and then dial the third person.  Once you hang
>up
> > the caller is transferred to the third person.
> >
> > Craig

Transfer feature is not enabled in 1.0.5.18 for asterisk, it is for Nortel

greg