[Asterisk-Users] Guide to Cisco 79xx

[Walid Azab]

Try this e-learning tutorial. It requires macromedia flash.
 
http://www.cisco.com/warp/public/779/largeent/avvid/products/7960/router_pag
e.htm
http://www.cisco.com/warp/public/779/largeent/avvid/products/7940/index_1020
.htm
 
Regards,
Walid

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paul Rodan
Sent: Wednesday, December 08, 2004 9:48 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Guide to Cisco 79xx



Anybody have a guide to the Cisco 79xx phones? One that I can give the 7 or
8 ppl in my office so that they can stop asking me questions. I was going to
type up a basic guide but then decided I don't want to reinvent the wheel,
one of you may already have one. I tried to use Cisco's guide but it's for
their own protocol, a lot of options are different or rearranged.

 

I need a basic user guide that instructs on placing calls, answering calls,
putting calls on holds, warm transfer, blind transfer,
activing/deactiviating do not disturb, conference calls and how to access
multiple calls on hold. Like how 2 can be on hold on line 1 and if another
call comes in, it goes to line 2. The only way to get back to the 2 on hold
on line 1 is to hit the line 1 button. 

 

Anything anybody has would help, it'd at least be a start and I can
addon/enhance or even simplify/dummy down some of it. I get so many
questions from ppl forgetting how to do something I think throwing a manual
at them would be far superior. Any help would be greatly appreciated. We use
a mix of 7940's and 7960's in SIP mode, with firmware 7-3

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041209/21ad8a2d/attachment.htm