[Asterisk-Users] Voicetronix vs Digium FXO

[Alex Barnes]

> -----Original Message-----
> From: Paul Dugas [mailto:Paul at DugasEnterprises.com] 
> Sent: 08 December 2004 14:35
> To: Asterisk Mailing List
> Subject: [Asterisk-Users] Voicetronix vs Digium FXO
> 
> 
> One of the suggestions I got for dealing with my analog FXO 
> woes was to look into using a Voicetronix card instead of the 
> Digium.  They're more expensive but if it worked better it 
> may be reasonable.  They indicated they were compatable with 
> the CVS HEAD version of *.
> 
> Can someone share with me their experiences with Voicetronix 
> OpenLine and/or OpenSwitch cards with *?  I'm specifically 
> interested in FXO handling and any issues with echo, inbound 
> DTMF detection, and inbound fax detection.


I would be interested in this as well, as I am far from impressed with
the TDM400P's we have.
Although that could be more to do with the driver support for the
motherboard / interrupt handling in the TDM400.  However that's not my
problem if there is another vendor with better support then Digium will
lose out.


> 
> Thanks in advance,
> 
> Paul
> 
> PS: Feel free to reply directly if you'd rather not clutter a 
> Digium list with Voicetronix traffic.

I have the Digium ISDN cards as well and I have had zero problems with
them so don't take this as a digium bashing comment but these mailing
lists are for "Asterisk Users" and not just "Digium fan boys". :-P
I am sure that the majority of mailing list subscribers are interested
in everything that can make their deployments run smoother.

Cheers

alex


This email and any attached files are confidential and copyright protected.  If you are not the addressee, any dissemination, distribution or copying of this communication is strictly prohibited.  Unless otherwise expressly agreed in writing, nothing stated in this communication shall be legally binding.