[Asterisk-Users] Is anyone using Cisco 7905G phones?

[jens]

Yes I'm working with 7905G phones. There's no problem in transfer calls.
Here's the regarding entry in my sip.conf:
[garage]
type=friend
username=7905g_1
secret=******
host=dynamic
canreinvite=no                  ; Cisco poops on reinvite sometimes
defaultip=1992.168.1.7
callgroup=1
context=ipphone

But you should'nt forget to enable call transfer within your
dial-statement in extensions.conf:
[ipphone]
exten => 123,1,Dial({$EXTEN}|20|Tt)

Also a problem could be the config on the phone itself. Via the
webinterface you can tell the phone to handle the transfer buttons or
not. Simply go on the page "Call Preferences" and the last two lines
called GUI Show Mask and mor important GUI Set Mask handle those
settings. You have to enable Bit 10 (Call Transfer) and 11 (Blind
Transfer) and now it will work. 

XML services won't work for my 7905G's. Each entry in the config files
is only marked as "reserved" - may be in future there'll be an usable
entry but till now there're no entries enabled.


Jens


> I have a few Cisco 7905G phones and I having a little trouble configuring
> them.  They are working with Asterisk.  I'm able to get the sip image
> loaded, but I can't get the phones to blind transfer.
> 
> Does the Cisco 7905G Phone use XML Services?
> 
> If you are using the 7905G phone, would you post any of your configuration
> files so I can try and figure out where I'm going wrong?
> 
> Thanks for your help,
> 
> Randy
> ---
> Outgoing mail is certified Virus Free.
> Checked by AVG anti-virus system (http://www.grisoft.com).
> Version: 6.0.802 / Virus Database: 545 - Release Date: 11/26/04
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Jens Lentföhr
http://www.jens-it.de