[Asterisk-Users] CAPI Newbie

[Humberto Aicardi]

Hi everyone,

	Hi, I am new to the ISDN world, today I received my new  NT box from
CS Telecom but unfortunately it doesn't work. I have installed all the
drivers and when I issue a "capiinfo" I get:

--------------------------------------------

Number of Controllers: 1
Controller 1:
Manufacturer: AVM GmbH
CAPI Version: 2.0
Manufacturer Version: 3.101-02(49.18)
Serial Number: 1000001
BChannels: 2
Global Options: 0x00000039
   internal controller supported
   DTMF supported
   Supplementary Services supported
   channel allocation supported (leased lines)
B1 protocols support: 0x4000011f
   64 kbit/s with HDLC framing
   64 kbit/s bit-transparent operation
   V.110 asynconous operation with start/stop byte framing
   V.110 synconous operation with HDLC framing
   T.30 modem for fax group 3
   Modem asyncronous operation with start/stop byte framing
B2 protocols support: 0x00000b1b
   ISO 7776 (X.75 SLP)
   Transparent
   LAPD with Q.921 for D channel X.25 (SAPI 16)
   T.30 for fax group 3
   ISO 7776 (X.75 SLP) with V.42bis compression
   V.120 asyncronous mode
   V.120 bit-transparent mode
B3 protocols support: 0x800000bf
   Transparent
   T.90NL, T.70NL, T.90
   ISO 8208 (X.25 DTE-DTE)
   X.25 DCE
   T.30 for fax group 3
   T.30 for fax group 3 with extensions
   Modem

  0100
  0200
  39000000
  1f010040
  1b0b0000
  bf000080
  00000000 00000000 00000000 00000000 00000000 00000000
  01000001 00020000 00000000 00000000 00000000

Supplementary services support: 0x000003ff
   Hold / Retrieve
   Terminal Portability
   ECT
   3PTY
   Call Forwarding
   Call Deflection
   MCID
   CCBS

-------------------------------------------

When I issue within * "capi info" I get:

Contr1: 2 B channels total, 2 B channels free.

But when I dial to the number nothing happens, when I dial using capi I get:


Dec  3 19:26:55 WARNING[2585]: chan_capi.c:653 capi_call: Destination
38126927 requres a real destination
    -- Couldn't call 38126927
    -- CAPI Hangingup

Finally I have a Fritz card, which I plugged into the NT S/To bus using a
plain Ethernet cable. Is there a way to know if the Fritz PCI card is
talking to the NT device?

Any help would be welcomed.

Thanks in advanced,
Humberto Aicardi