[Asterisk-Users] E100P not starting?

[Andres Junge]

Hello
I have installed my new E100P card in the same machin with two TDM04B cards.
I have followthe instructions on 
http://www.digium.com/index.php?menu=configuration#T_E100P_PRI

This is my zapata.conf
span=1,0,0,cas,ami
fxsls=1-15,17-31
dchan=16
fxsks=32-39
loadzone = us
defaultzone=us

I do *modprobe zaptel wct1xxp wcfxs
ans seems to work ok.
*
But when i do

ztcfg -vvv

i got

Zaptel Configuration
======================

SPAN 1: CAS/ AMI Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXS Loopstart (Default) (Slaves: 01)
Channel 02: FXS Loopstart (Default) (Slaves: 02)
Channel 03: FXS Loopstart (Default) (Slaves: 03)
Channel 04: FXS Loopstart (Default) (Slaves: 04)
Channel 05: FXS Loopstart (Default) (Slaves: 05)
Channel 06: FXS Loopstart (Default) (Slaves: 06)
Channel 07: FXS Loopstart (Default) (Slaves: 07)
Channel 08: FXS Loopstart (Default) (Slaves: 08)
Channel 09: FXS Loopstart (Default) (Slaves: 09)
Channel 10: FXS Loopstart (Default) (Slaves: 10)
Channel 11: FXS Loopstart (Default) (Slaves: 11)
Channel 12: FXS Loopstart (Default) (Slaves: 12)
Channel 13: FXS Loopstart (Default) (Slaves: 13)
Channel 14: FXS Loopstart (Default) (Slaves: 14)
Channel 15: FXS Loopstart (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: FXS Loopstart (Default) (Slaves: 17)
Channel 18: FXS Loopstart (Default) (Slaves: 18)
Channel 19: FXS Loopstart (Default) (Slaves: 19)
Channel 20: FXS Loopstart (Default) (Slaves: 20)
Channel 21: FXS Loopstart (Default) (Slaves: 21)
Channel 22: FXS Loopstart (Default) (Slaves: 22)
Channel 23: FXS Loopstart (Default) (Slaves: 23)
Channel 24: FXS Loopstart (Default) (Slaves: 24)
Channel 25: FXS Loopstart (Default) (Slaves: 25)
Channel 26: FXS Loopstart (Default) (Slaves: 26)
Channel 27: FXS Loopstart (Default) (Slaves: 27)
Channel 28: FXS Loopstart (Default) (Slaves: 28)
Channel 29: FXS Loopstart (Default) (Slaves: 29)
Channel 30: FXS Loopstart (Default) (Slaves: 30)
Channel 31: FXS Loopstart (Default) (Slaves: 31)
Channel 32: FXS Kewlstart (Default) (Slaves: 32)
Channel 33: FXS Kewlstart (Default) (Slaves: 33)
Channel 34: FXS Kewlstart (Default) (Slaves: 34)
Channel 35: FXS Kewlstart (Default) (Slaves: 35)
Channel 36: FXS Kewlstart (Default) (Slaves: 36)
Channel 37: FXS Kewlstart (Default) (Slaves: 37)
Channel 38: FXS Kewlstart (Default) (Slaves: 38)
Channel 39: FXS Kewlstart (Default) (Slaves: 39)

39 channels configured.

ZT_SPANCONFIG failed on span 1: Invalid argument (22)


what i'm doing wrong?

thanxs in advance

andres.